Hi, 1. Do you see the image degradation and image dimensions changes in the web interface after the parameters are applied? Do images keep refreshing there (or check mjpeg stream)? Also, check http://192.168.0.9:2323/meta - refresh the page a few times and check if the frame counters are updating?
2. In your log I see fps was 2.5. Was autoexposure running? Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc. On Fri, Jul 31, 2020 at 10:44 AM Daniele Forsi <d.fo...@skyeyesystems.it> wrote: > Hello, > > when I change the parameters DCM_HOR and DCM_VERT the stream stops and the > str daemon can't be stopped with Ctrl-C or kill -KILL and I need to reboot > the board (the web server and ssh server are still working). > I have set those parameters to 2, 3 and 4 using the web interface. > > This happens both if str is not running and when it is running , in this > case the last lines printed are: > > streamer.cpp: handler: 366: sensor port: 0 event: running= 0 streamer.cpp: > update_settings: 131: sensor port: 0 update_settings > video.cpp: getFramePars: 285: sensor port: 0 before=0 > metadata_start=46106528 > video.cpp: getFramePars: 285: sensor port: 0 before=0 > metadata_start=45742816 > video.cpp: get_current_desc: 350: sensor port: 0 fps=2.5 > Socket::poll()... > socket.fd == 8; 9; > revents == 0; POLLIN == 1 > revents == 0; POLLIN == 1 > streamer.cpp: handler: 366: sensor port: 0 event: running= 0 streamer.cpp: > update_settings: 131: sensor port: 0 update_settings > > > after a couple of seconds another line is printed: > > video.cpp: getFramePars: 285: sensor port: 0 before=0 > metadata_start=41742464 > > and then nothing more. > > How can we debug this situation? > > thanks you > Daniele Forsi > > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
