I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI and let you guys know.
> -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 11, 2005 3:00 PM > To: David Strout > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com > Subject: Re: [pfSense Support] ISO problems ... still > > We're hot on the trail now. I bet your using SCSI? > > Scott > > > On 8/11/05, David Strout <[EMAIL PROTECTED]> wrote: > > I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and > > found little or not relavant info, but I did a couple of Googles and > found > > some pertinant info ... seems there is some known issues w/ installing > *BSDs > > w/ the CD in a different IDE channel than the HDD that you are > installing > > to. There are also lots of hits on disabling the APM (Power Mgmt.) > ..... I > > have tried and tried to get the newest ISO (0.74.6) to work w/ many many > > different hardware configurations, but to no avail !!! > > > > Naything I can do to contribute to getting this worked out let me know > .... > > I have a couple of test platforms to work w/ and a pretty outfitted lab > at > > my disposl to test in. > > > > I did notice that unless you install fresh from the ISO some of the > fixes > > don't apply correctly .... namely the delete icon on the "IPSec:SPD" > page, > > and also I noticed that the fix for the adding DHCP only fixed itself > > (linking to the "edit static mapping" page) after up! grading to 0.74.8 > > today. > > > > GREAT JOB / AWESOME PRODUCT !!!! ....... how can I be of more assistance > ??? > > > > -- > > David L. Strout > > Engineering Systems Plus, LLC > > > > > > ----- Original Message ----- > > Subject: Re: [pfSense Support] ISO problems ... still > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Date: 08-11-2005 2:01 pm > > > > > > We are working on this. Everyone please be patient. The installer > > is a tricky piece to get right for such a broad range of hardware and > > such. > > > > Scott > > > > > > On 8/11/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > > I'm in the same boat as well on Dell GX 110's. I have fol! lowed the > > 'upgrade > > > solution' of installing 0.68.x and upgrading from there. > > > > > > > -----Original Message----- > > > > From: William Pflaumer [mailto:[EMAIL PROTECTED] > > > > Sent: Thursday, August 11, 2005 7:11 AM > > > > To: David Strout > > > > Cc: support@pfsense.com > > > > Subject: RE: [pfSense Support] ISO problems ... still > > > > > > > > David and List, > > > > I,too have not been able to do a harddrive install on my Dell > Dimension > > > > XPS > > > > R300 since V 0.63 or so.(Last version that the installer functioned > > > > properly) > > > > That version had a bug with DHCP Client on the WAN Interface. I get > > Kernel > > > > Page Faults about 50% of the install will all later LiveCDs. I don't > > have > > > > speci! fic errors, but I tried about 6 different Live CDs versions. > I > > tried > > > > > > Bios tweaks (NO sound, NO power Management, NO USB), different > memory > > (Ran > > > > Extensive memory tests),different HD,CDROM Drives, Use known good > 3Com > > > > 3c905b > > > > from my Monowall PC. As a New Version comes out and fails to > install, I > > > > try > > > > different things (place HD and CDROM Drive on the Same IDE Channel > or > > > > delete > > > > the Partition with DELPART), the list goes on and on. I tried the > > install > > > > on > > > > a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. > > > > > > > > Someone will probably suggest install that earlier version ( I > believe > > it > > > > was > > > > 0.63) and do a manual update from there, but the way this product is > > > > evolving > > > > that idea probable will not work. I really like this firewall (been > > using > > > > ! Monowall since pb27) but I just cannot get this SOB to install. > The > > > > feature I > > > > am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent > > Proxy. > > > > > > > > I can post the specific errors that I receive if need be (no time to > do > > it > > > > now) > > > > > > > > Thanks for this great Product, > > > > > > > > Bill > > > > > > > > -----Original Message----- > > > > From: David Strout [mailto:[EMAIL PROTECTED] > > > > Sent: Wednesday, August 10, 2005 12:59 PM > > > > To: support@pfsense.com > > > > Subject: [pfSense Support] ISO problems ... still > > > > > > > > Anyone, > > > > > > > > I have tried burning all of the version 0.73.x > > > > ISOs, and still the problem of when you launch t! he > > > > "/FreeSBIE/scripts/install.sh" script it hangs on > > > > the "Waiting for Backend" ANSI screen. > > > > Additionally, a couple of mesages pop up on the > > > > bottom of the screen ... xl0 link changed state to > > > > DOWN & xl0 link tate changed to UP. > > > > > > > > BTW ... xl0 is configured for the WAN interface on > > > > the ISO boot up and pre-config. > > > > > > > > I'm at a loss ... tried a few BIOS tweaks and > > > > nothing seems to help. I'm wondering if anyone > > > > else is experiencing the same symptoms. > > > > > > > > BTW2 ... tried two different PC's .... a Dell > > > > GX260 & a generic PC running an AMD Athelon 700Mhz > > > > > > > > I have had no problems w/ prior versions (0.68.x), > > > > but this issue crept up in/or about the 0.73.0 > > > > version. > > > > > > > > Any ! ideas ????? > > > > > > > > -- > > > > David L. Strout > > > > Engineering Systems Plus, LLC > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
