Hello, I put both firewall images of the Linux-based IPCop 1.4.9 and FreeBSD-based pfSense 0.86.4 on the compact flash. Grub is used to choose which firewall system to start from.
256M CF http://shopping.hacom.net/catalog/pub/ipcop/256-hdc-ipcop-pfsense-flash.img.gz 512M CF http://shopping.hacom.net/catalog/pub/ipcop/512-hdc-ipcop-pfsense-flash.img.gz 1gb CF http://shopping.hacom.net/catalog/pub/ipcop/1gb-hdc-ipcop-pfsense-flash.img.gz These images are for the Hacom/Lex or any systems that boot the CF from the secondary master IDE. Just use dd to install it, i.e., Linux gzunip -c 256-hdc-ipcop-pfsense-flash.img.gz | dd of=/dev/sda bs=16k or BSD gzunip -c 256-hdc-ipcop-pfsense-flash.img.gz | dd of=/dev/da0 bs=16k Let me know how it works. Thanks. Bao -- Best Regards. Bao C. Ha Hacom OpenBrick Distributor USA http://www.hacom.net voice: (714) 530-8817 fax: (714) 530-8818 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]