Fixed.
update_file.sh /usr/local/www/system_advanced.php
and re-run shaper wizard or add:
<schedulertype>hfsc</schedulertype>
to <shaper> tag in /conf/config.xml and reboot.
--Bill
On 10/29/05, Peter Zaitsev <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I tried to enable device pooling in advanced options (the only one thing
> I changed on reboot and it lead to traffic shaping breakage):
>
>
> # pfctl -f /tmp/rules.debug
> /tmp/rules.debug:14: no scheduler specified!
> /tmp/rules.debug:15: no scheduler specified!
> /tmp/rules.debug:17: queue qWANRoot has no parent
> /tmp/rules.debug:17: errors in queue definition
> /tmp/rules.debug:18: syntax error
> /tmp/rules.debug:19: queue qLANRoot has no parent
> /tmp/rules.debug:19: errors in queue definition
> /tmp/rules.debug:20: syntax error
> /tmp/rules.debug:21: syntax error
> /tmp/rules.debug:22: syntax error
> /tmp/rules.debug:23: syntax error
> /tmp/rules.debug:24: syntax error
> /tmp/rules.debug:25: syntax error
> /tmp/rules.debug:26: syntax error
> pfctl: Syntax error in config file: pf rules not loaded
>
>
> These basically correspond to:
>
>
>
> scrub on em0 all
> altq on em0 bandwidth 100Mb queue { qWANRoot }
> altq on em1 bandwidth 1000Mb queue { qLANRoot }
>
> queue qWANRoot bandwidth 20000Kb priority 6 { qWANdef, qWANacks,
> qOthersUpH, qOthersUpL }
> queue qWANdef bandwidth 1% priority 3 ( default upperlimit(100% 100
> 90%) linkshare(0% 1000 10%) realtime(10% 1 10%) )
> queue qLANRoot bandwidth 20000Kb priority 6 { qLANdef, qLANacks,
> qOthersDownH, qOthersDownL }
> queue qLANdef bandwidth 1% priority 3 ( default upperlimit(100% 100
> 90%) linkshare(0% 1000 10%) realtime(10% 1 10%) )
> queue qLANacks bandwidth 1% priority 6 ( upperlimit(80% 1 80%)
> linkshare(0% 1000 10%) realtime(10% 1 10%) )
> queue qWANacks bandwidth 1% priority 6 ( upperlimit(80% 1 80%)
> linkshare(0% 1000 10%) realtime(10% 1 10%) )
> queue qOthersUpH bandwidth 1% priority 4 ( red ecn upperlimit(100% 100
> 90%) linkshare(0% 1000 10%) realtime(1Kb 1 1Kb) )
> queue qOthersDownH bandwidth 1% priority 4 ( red ecn upperlimit(100%
> 100 90%) linkshare(0% 1000 10%) realtime(1Kb 1 1Kb) )
> queue qOthersUpL bandwidth 1% priority 2 ( red ecn upperlimit(100% 100
> 90%) linkshare(0% 1000 10%) realtime(1Kb 1 1Kb) )
> queue qOthersDownL bandwidth 1% priority 2 ( red ecn upperlimit(100%
> 100 90%) linkshare(0% 1000 10%) realtime(1Kb 1 1Kb) )
>
>
> Also which worries me even more is the fact pfsense seems to switch to
> "allow everything" mode in this case which is kind of dangerous.
>
> I guess there are some safeguards need to be implemented against it.
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
