Send the output.txt of... date >> /tmp/output.txt
netstat -m >> /tmp/output.txt netstat -in >> /tmp/output.txt sysctl hw.em0.stats=1 >> /tmp/output.txt sysctl hw.em1.stats=1 >> /tmp/output.txt sysctl hw.em2.stats=1 >> /tmp/output.txt Can you send these while the machine is normal and when the machine is choking? (send the output.txt file btw) Are you able to try this test using routing ver bridging? -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Monday, October 31, 2005 1:09 PM To: support@pfsense.com Subject: Re: [pfSense Support] Network Device pooling On 10/31/05, Peter Zaitsev <[EMAIL PROTECTED]> wrote: > On Mon, 2005-10-31 at 12:03 -0500, Scott Ullrich wrote: > > Please describe the hardware your using fully. NICS, etc. This is > > not normal behavior. > > Sure It is Dell Poweredge 750 > 512MB RAM, SATA150 disk, Celeron 2.4Ghz > > ACPI APIC Table: <DELL PE750 > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.10-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x4400<CNTX-ID,<b14>> > real memory = 536608768 (511 MB) > avail memory = 515547136 (491 MB) > > > > Nics are build in Intel 10/100/1000 NICs: > > em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port > 0xece0-0xecff mem 0xfe1e0000-0xfe1fffff irq 18 at device 1.0 on pci1 > em0: Ethernet address: 00:14:22:0a:64:4c > em0: Speed:N/A Duplex:N/A > > > It does not looks like this is hardware issue for me as if I disable > firewall it works fine. > > I tried turning off scrub and it does not change anything. Still timeout > after few requests: And when this timeout occurs do you see anything in the system logs? Can you still telnet into the apache server behind pfsense? This really doesn't make a lot of sense. It should be able to stand up to this. Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]