Hello ! I have a minor problem with my new installation of pfSense 2 :
I have a pfSense 2.0-BETA3 box as a home router. The box has 3 wired ETH ports and a wireless interface. It is configured as follow : WAN : vr0 LAN : BRIDGE0 OPT1 : vr1 OPT2 : vr2 OPT3 : ath0 (wireless card) BRIDGE0 : OPT1, OPT2, OPT3 There is a PC connected directly behind OPT1, and a switch connected behind OPT2 with multiple computers behind it. pfSense handles the NAT to connect to the internet and DHCP to all hosts. I have a rule to allow all traffic from LAN to any. Connecting from any of the interfaces behind pfSense can connect to the net with no problem. But connections from a PC behind OPT1 to a PC behind OPT2 fail. Using Wireshark, I can see that SYN packet are sent, but no response is received (or ICMP echo request, with no echo response). What more should I configure to allow traffic between the different interfaces of the bridge ? Thanks for your help ! Guillaume PS: For your informations, I have also posted this question on ServerFault : http://serverfault.com/questions/157557/pfsense-with-a-bridge-as-a-lan-interface-traffic-blocked-between-interfaces -- mobile : +41 76 573 32 40 skype : Guillaume.Lederrey projects : * http://rwanda.ledcom.ch/ * http://trock.ch/ others : * http://kiva.org/ --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
