> Chris, > > Sounds like blown head gasket - if so it should not be too serious, just > take the head off & replace with a new head gasket. You might want to > take the opportunity to reseat the valves while the head is off. Make > sure you follow the recommended tightening sequence & torque settings > for the head bolts. > > More seriously you might have a cracked block - not much you can do > there except scrap it. > > Hope that helps > > Malcolm >
Hopefully it hasn't overheated or ruined any bearings due to the water. -- Martin Klingensmith http://infoarchive.net/sgroup/biofuel/ ------------------------ Yahoo! Groups Sponsor --------------------~--> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/FGYolB/TM --------------------------------------------------------------------~-> Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuels list archives: http://infoarchive.net/sgroup/biofuel/ Please do NOT send Unsubscribe messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/biofuel/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/