Hmm, I remember I had similar problem with earler version of libreswan.
But my current configuration mostly has ikev1 peers. Few ikev2 peers
config has just one left/rightsubnet, so I'm not sure
27.09.2018 17:59, Satavee Junwana пишет:
I also have the same problem for ikev2.,
Libreswan initiate phase1 for each submet. But there has no problem wth
ikve1 ... noted:libreswarn-3.26
Sent via Iphone
On 27 Sep 2018, at 21:47, J Kephart <jkeph...@safetynetaccess.com
<mailto:jkeph...@safetynetaccess.com>> wrote:
What is right way to put in config r amore than one subnet?
On some forums i find:
rightsubnets={172.16.1.0/24 <http://172.16.1.0/24> 192.168.3.0/24
<http://192.168.3.0/24>}
rightsubnets={172.16.1.0/24,192.168.3.0/24
<http://172.16.1.0/24,192.168.3.0/24>}
rightsubnets={172.16.1.0/24,192.168.3.0/24,
<http://172.16.1.0/24,192.168.3.0/24,>}
What variant right?
Eugeniy, use the comma-separated format. That's the one that worked
for us.
-- Jim
_______________________________________________
Swan mailing list
Swan@lists.libreswan.org
https://lists.libreswan.org/mailman/listinfo/swan
--
С уважением, Иван Кузнецов
Руководитель технического отдела
Компания "СОЛВО"
+7(812)60-60-555
+7(495)66-83-003
+7(921)740-72-61
http://www.solvo.ru
_______________________________________________
Swan mailing list
Swan@lists.libreswan.org
https://lists.libreswan.org/mailman/listinfo/swan