Hi, I've tried to establish SIT tunnel to Hurricane Electric, using systemd v214. It does not work, device do not appear. I'm concerned about networkd discarding part of netlink messages, see below. Original instruction is provided by HE, rest is my shot at translating it into netdev (nb. manpage wasn't updated when tunnel features went in).
Original instruction: --------------------- modprobe ipv6 ip tunnel add he-ipv6 mode sit remote 216.66.80.162 local 109.107.25.67 ttl 255 ip link set he-ipv6 up ip addr add 2001:470:70:68d::2/64 dev he-ipv6 ip route add ::/0 dev he-ipv6 ip -f inet6 addr $ cat he.netdev --------------- [NetDev] Name=he Kind=sit [Tunnel] Local=109.107.25.67 Remote=216.66.80.162 $ cat he.network ---------------- [Match] Name=he [Network] Tunnel=he Address=2001:470:70:68d::2/64 $ SYSTEMD_LOG_LEVEL=debug /lib/systemd/systemd-networkd ------------------------------------------------------- timestamp of '/etc/systemd/network' changed he: loaded sit sd-rtnl: discarding 20 bytes of incoming message could not add new link could not add new link eth1: link 3 added eth1: udev initialized link eth1: unmanaged eth1: flags change: +UP +LOWER_UP +RUNNING +MULTICAST +BROADCAST … -- Tomasz Torcz "Never underestimate the bandwidth of a station xmpp: zdzich...@chrome.pl wagon filled with backup tapes." -- Jim Gray _______________________________________________ systemd-devel mailing list systemd-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/systemd-devel