On 01/24/2014 02:09 PM, Henning Brauer wrote:
* Ted Unangst <t...@tedunangst.com> [2014-01-24 17:48]:
Are people still using sk, gem, or hme (!) in pps performance critical
situations?
doesn't make sense to do so, and hasn't in a long time...
Performance critical? Well, given the pathetic speeds available in
the USA for less than a small fortune, sk works well and was cheap.
Yes, this is an ancient release and an ancient/snail slow CPU...
it works and the system uses about 15W with only 1 tiny fan.
At max load (routing 20 mbit and forwarding 200 mbit or so) the
CPU is 25% loaded.
[Why an ancient release?
sysmerge didn't handle any of the crucial update cases (pf changes
especially)
at all well. It didn't differentiate release-to-release changes from user
changes. Maybe it does now with diff3 - that's what I use.
(old release /etc <-> current system /etc <-> new release /etc).
This box will probably go to 5.5 or 5.4 current - not significantly less
work than a single release update.]
OpenBSD 5.2 (GENERIC) #278: Wed Aug 1 10:04:16 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,NXE,SSE3,EST,TM2
real mem = 1005056000 (958MB)
avail mem = 977776640 (932MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/16/06, BIOS32 rev. 0 @ 0xfb570,
SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/16/2006
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 100MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdc84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdbb0/208 (11 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x5000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100f1308000f13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1501 MHz: speeds: 1500, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci_intr_map: bus 0 dev 1 func 0 pin 1; line 10
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 2; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 3; line 9
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 4; line 5
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
skc0 at pci0 dev 8 function 0 "D-Link DGE-530T A1" rev 0x11, Yukon
(0x1): apic 2 int 17
sk0 at skc0 port A: address 00:0d:88:c8:2b:c8
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 3
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 10 function 0 not configured
re0 at pci0 dev 11 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SCd
(0x1800), apic 2 int 19, address 00:30:18:a8:10:76
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using apic 2 int 20 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <STT_SX16B6XSL>
wd0: 1-sector PIO, LBA48, 15272MB, 31277232 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDW/DVD SH-M522C, TS01> ATAPI
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
viapm0: 24-bit timer at 3579545Hz
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int 22
ac97: codec id 0x56494170 (VIA Technologies VT1617)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23,
address 00:30:18:a2:dd:0f
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fins0 at isa0 port 0x4e/2
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (b2f3ba071fa0e64c.a) swap on wd0b dump on wd0b
