read this on:
http://www.realhamradio.com/gps-satstat-software.htm
When you first turn on the Z3816A GPS receiver, it is always
continuously sending time. There are two commands you need to use: one
to put it into the SCPI> command mode, the other to switch it back to
sending time. The two commands are:
To go to the SCPI mode:
ptim:tcod:cont 0
To go to the continuous time mode:
ptim:tcod:cont 1
this holds true also on the J6 (RS422/1PPS) connector of the Lucent
KS-24361 Z3811 and maybe Z3812 ( watchout there is no !! echo if you are
using a terminal software but Z3811.exe works fine).
cheers Götz
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.