Hi,
I have made up two software cuts to implement the divider on
a 16F628. One was for a 10 MHz input and the other was for a
20 MHz VCO input.
The shot to making it work on the 16F628 is to look at the
differences in the low memory allocation for both the 16C84 and
the 16F628. The fusible links are also different. You also need
to set CMCON on the 16F628 to turn off the comparators.
Regards,
Brian
VK4GTW
_______________________________________________
time-nuts mailing list
[email protected]
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
