"It would be nice to put the known infromation on the GPSTM boards on a webpage so that newcomers do not have to start from the beginning."
You are welcome to use my wiki like for the FE5680 Rubidium oscillator by John Beale: http://www.ko4bb.com/dokuwiki/doku.php?id=precision_timing:fe5680a_faq Didier KO4BB Sent from my BlackBerry Wireless thingy while I do other things... -----Original Message----- From: b...@lysator.liu.se Sender: time-nuts-boun...@febo.com Date: Mon, 21 May 2012 01:32:14 To: Discussion of precise time and frequency measurement<time-nuts@febo.com> Reply-To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Subject: Re: [time-nuts] NTGS50AA RS422 Murray, > Bjorn, > I don't know of an RS422 connection at the back of the NTGS50AA. There is > a > 'CMOS' level serial output (essentailly a monitor point) on the top pin, > 7th > row along from the end the power is applied. There are also 10MHz PECL > outputs at the other end of the connector. > > I use either Trimble's GPS Monitor software or the latest Lady Heather, > and > I connect to the front panel RS232 connector. > > 73, > Murray ZL1BPU I have sofar only used power on the back connector. Tboltmon works out-of-the-box on the front RS232. Does GPS Monitor have extras compared to Tboltmon? I have not yet got Lady Heather to work, have not spent much time on it though. I got the RS-422 from Sams message (16th of April). > Serial Interfaces: > Port A is RS-422 @19200 SCPI (available on the 110 pin connector on the > main board) > Port B is RS-232 @9600 TSIP (DB9 connector on Breakout board) This Port A (or monitor port) does it go directly to the Trimble CPU ASIC? Are there perhaps a hidden second serial port also on the normal Tbolts? It would be nice to put the known infromation on the GPSTM boards on a webpage so that newcomers do not have to start from the beginning. -- Björn _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.