On Thu, Apr 11, 2013 at 11:49 AM, Brooke Clarke <bro...@pacific.net> wrote: > Hi Steve: > > Many GPS receivers are designed with Type-F RF inputs in order to make use > of the low cost TV coax. > But even if a GPS receiver has a 50 Ohm RF input you can still use 75 Ohm > feed line,
Yes they work but more than that. At least according to Trimble they are preferred connector type. The user manual that goes with my Trimble Thunderbolt (Version 5.0 Nov 03) says to use f-connectors and RG-59 for runs up to about 100 feet. The factory supplied kit from Trimble has 75 feet of this kind of wire. The thing to note is that while the above Trimble parts work OK for a GPS antenna it is not water proof and if left outdoors in the rain for a few years will fail. The better connectors are "compression" not "crimp' The easy way to tell the difference is the compressor tool applies a force that is in parallel with the center conductor while a crimp tool applies the force at a 90 degree angle to the center conductor. Also while you can kind of "fake it" by using improvised tools to attach a crimp type connector you must have the right tool to attach a compression type. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.