I've done some more work on the code, mostly in the area of health monitoring -- it's able to look at whether the GPS is locked, whether the Rb is locked, and whether the PLL has a good capture, and decide accordingly whether to enable 1PPS and whether to report a good lock on NTP. It will holdover on the Rb if it was previously in an ideal state and the GPS lock (but nothing else) is lost.
I also tidied things up (relatively speaking), moved them into a case, and took a picture: anyone who wants to see what the build looks like can take a look at https://www.flickr.com/photos/hobbified/14999762988/ . And then, minutes after taking that picture, I shorted something that I shouldn't have and fried the Due. I think everything else survived (I see 1PPS and serial out of the GPS, and 10MHz out of the Rb) but I'm out of business until I can replace that board, and the supplier is in Australia. Andrew _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.