I bought some of the Furuno GT-8736 boards for $35 a pop, qty 1 (or 2 as was the case). And was quoted at $26.91 a pop if I buy 100. If there's interest, I'm happy to coordinate a group buy at cost. Just paid off that credit card yesterday so why not? If there are more desirable boards from Furuno, let me know and I'll see what I can do.
-Bob On Thu, Feb 15, 2018 at 3:59 AM, ew via time-nuts <time-nuts@febo.com> wrote: > Talking about Furuno has any one looked at the GT-87. I have known about > it for years but found no way to buy some now DigiKey has them for $ 100, > Buerklin in Germany for half that price. Saw tooth is +- 1.7 nsec we are > not going to bother with correction. We are in the process to lay out a > board any recommendations are appreciated > Bert Kehren > > In a message dated 2/15/2018 12:39:48 AM Eastern Standard Time, > hol...@hotmail.com writes: > > > I just did a small adapter board that converts the 2x5 pin 2mm header on > the Furuno GT-8031 to a 1x9 pin 0.1" connector with the pinouts of the > Adafruit Ultimate GPS. There a couple of minor pin differences... the > Adafruit FIX pin is not used and the Adafriuit 3.3VREG output pin is used > as the Furuno antenna power connection. The Furuno can be soldered to the > board or a female connector could be installed. > > I'm getting ready to order a few boards. If interested, contact me off > list._______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > 1 Attached Images > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.