Hallo David,
Am Mon, 6 May 2019 16:43:28 +0800 schrieb David Penn <px920...@gmail.com>: > *tinc.conf > Name = envy13 > Device = /dev/net/tun I think, you do not need to specify "Device". (I never did) > ConnectTo = main > > *hosts/main > Address = <my vps ext ip address> > Port = 655 > Subnet = 10.0.0.1/32 > > *hosts/envy13 > Port = 655 > Subnet = 10.0.0.2/32 > > *tinc-up > #!/bin/sh > ip link set myvpn up > ip addr add 10.0.0.2/32 dev myvpn > ip route add 10.0.0.0/24 via 10.0.0.2 I understand the above as "route the subnet through myself". This is not what you want, or? I guess, the following lines would be sufficient? ip link set myvpn up ip addr add 10.0.0.2/24 dev myvpn > I have ufw allowed 655. What did i miss? You can always verify the active connections by sending USR1: tincd -n myvpn --kill=USR1 Afterwards you can take a look at your daemon log (e.g. /var/log/daemon.log). There you will find the list of currently connected peers. Cheers, Lars _______________________________________________ tinc mailing list tinc@tinc-vpn.org https://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc