The eth_send routine of the U-boot DM9000x driver does not match the
DM9000 or DM9000A application notes/programming guides.
This change improves the stability of the DM9000A network controller.
This change has been tested with DM9000A, DM9000E, DM9000EP.
Signed-off-by: Remy Bohmer <[EMAIL PROTECTED]>
---
drivers/net/dm9000x.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
Index: u-boot-git-03062008/drivers/net/dm9000x.c
===================================================================
--- u-boot-git-03062008.orig/drivers/net/dm9000x.c 2008-06-03
15:19:03.000000000 +0200
+++ u-boot-git-03062008/drivers/net/dm9000x.c 2008-06-03 15:19:10.000000000
+0200
@@ -42,6 +42,9 @@ v1.2 03/18/2003 Weilun Huang <we
06/03/2008 Remy Bohmer <[EMAIL PROTECTED]>
- Added autodetect of databus width.
- Made debug code compile again.
+ - Adapt eth_send such that it matches the DM9000*
+ application notes. Needed to make it work properly
+ for DM9000A.
These changes are tested with DM9000{A,EP,E} together
with a 200MHz Atmel AT91SAM92161 core
@@ -505,15 +508,16 @@ int
eth_send(volatile void *packet, int length)
{
char *data_ptr;
- u32 tmplen, i;
int tmo;
struct board_info *db = &dm9000_info;
DM9000_DMP_PACKET("eth_send", packet, length);
+ DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
+
/* Move data to DM9000 TX RAM */
data_ptr = (char *) packet;
- DM9000_outb(DM9000_MWCMD, DM9000_IO);
+ DM9000_outb(DM9000_MWCMD, DM9000_IO); /* Prepare for TX-data */
/* push the data to the TX-fifo */
(db->outblk)(data_ptr, length);
@@ -523,16 +527,19 @@ eth_send(volatile void *packet, int leng
DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
/* Issue TX polling command */
- DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+ DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
/* wait for end of transmission */
tmo = get_timer(0) + 5 * CFG_HZ;
- while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+ while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
+ !(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
if (get_timer(0) >= tmo) {
printf("transmission timeout\n");
break;
}
}
+ DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
+
DM9000_DBG("transmit done\n\n");
return 0;
}
--
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
