On Wednesday 02 July 2008, navin karnam wrote: > When u-boot is loaded on board following messages come on my board. > > U-Boot 1.3.3 (Jul 2 2008 - 10:34:34) > > DRAM: 256 MB > ERROR: too many flash sectors
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Flash: 64 MB > *** Warning - bad CRC, using default environment > > > In: serial > Out: serial > Err: serial > > $ I suggest that you first solve the problem above with the "too many flash sectors". Most like you only need to increase CFG_MAX_FLASH_SECT in your board config file. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
