Hi On Thu, Aug 7, 2008 at 12:05 AM, Wolfgang Denk <[EMAIL PROTECTED]> wrote: > In message <[EMAIL PROTECTED]> you wrote: >> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a. >> 3DS) board. >> >> Booting from NAND is not supported yet so U-boot relies on some other >> initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM. >> >> Signed-off-by: Magnus Lilja <[EMAIL PROTECTED]> > ... >> --- /dev/null >> +++ b/include/configs/mx31pdk.h >> @@ -0,0 +1,186 @@ > ... >> + >> +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz >> */ > > Please remove that line. Makes no sense to undef what doesn't exist.
Ok (quite a number of board configs have this #undef and some have a #define CFG_CLKS_IN_HZ). >> +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ >> + >> +#define CFG_HZ CONFIG_MX31_CLK32 >> + >> +#define CONFIG_CMDLINE_EDITING 1 >> + >> +#undef CONFIG_CMD_IMLS > > Why do you want to disable the "imls" command? Because I get compilation errors from cmd_bootm.c if it's enabled. I haven't checked the details but perhaps it's because there is no NOR flash defined in this config (no NOR present on the PDK board). > ... >> +#undef CONFIG_JFFS2_CMDLINE > > Why do you disable this? Probably a leftover from either a compilation problem or copy&pasted from the config file I started with (some other i.MX31 board). I'll remove the line if I don't run into problems, it seems to compile OK if I remove the line. Thanks, Magnus ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users