Dear cjjoy1980, In message <[EMAIL PROTECTED]> you wrote: > > I am trying to boot my board with initramfs file system. After loading the > kernel image and initramfs onto uboot, executing bootm command gave me > errors of "bad magic number". Then I tried to append header information > using > mkimage, here's what I executed: ... > 1. Where am I going wrong. Can I not boot using Initramfs, or should I > create Ramdisk image only for booting the board.
Initramfs != ramdisk. > 2. If I need to create ramdisk using genext2fs is there any size > restriction, that the file size should be > less than 8 MB? No. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "Most people would like to be delivered from temptation but would like it to keep in touch." - Robert Orben _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
