Dear "Ayman M. El-Khashab", In message <[EMAIL PROTECTED]> you wrote: > > I should have mentioned that we have DEBUG enabled and we've also > run the RAM test that is included in u-boot. The ram test does pass.
Please see the FAQ, entry # 1. Passing the RAM test does not mean anything when it comes to accessing the RAM in burst mode. > I am not familiar with those, I thought that once the SDRAM is operating > you cannot alter those calibration and timing/delay registers. Is this > calibration something that is enabled in u-boot or just via the register > accesses to the memory controller? How about reading the code? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] Contrary to popular belief, thinking does not cause brain damage. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
