On Tue, Feb 10, 2009 at 9:14 PM, Remy Bohmer <li...@bohmer.net> wrote: > Hello Fabio, > > 2009/2/10 Fabio Porcedda <fabio.porce...@gmail.com>: >> [...] >> >> I would like to use an USB Console with an AT91SAM9260 microcontroller, >> so I've read that the usb device driver and the serial over usb driver >> should be enabled: >> >> [...] > > You might take a look at the U-boot-usb git tree, especially the cdc branch. > It contains everything to get the at91udc driver to work in U-boot.
Thank you very much for the information. I have previously checked the U-Boot usb git tree, but i missed the cdc branch. In the cdc branch there is the at91udc driver with the CDC-ethernet driver. But i need to use the Serial over USB, implemented by the drivers/serial/usbtty.c The usbtty.c use the udc_* api implemented by usbdcore_mpc8x.c and usbdcore_omap1510.c. If i want to use the usbtty.c driver i need to porting it to the at91udc gadget api implemented by the at91udc driver? Best Regards. -- Fabio Porcedda _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot