On Wed, Dec 26, 2012 at 11:21 AM, Fabio Estevam <feste...@gmail.com> wrote: > On Wed, Dec 26, 2012 at 3:08 PM, Robert Nelson <robertcnel...@gmail.com> > wrote: > >> I'll keep debugging it here, did reverting this commit, help with the resets? >> http://git.denx.de/?p=u-boot.git;a=commit;h=28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad > > Tried reverting it and still see the data-aborts. > > I am also testing on my mx53loco board with the mc34708 pmic and I see > that it hangs on boot about 10% of the attempts: > U-Boot 2013.01-rc2-00172-gf8cfcf1-dirty (Dec 26 2012 - 15:15:27) > > Board: MX53 LOCO > I2C: ready > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > > This did not happen prior to commit c73368150 (pmic: Extend PMIC > framework to support multiple instances > of PMIC devices).
Okay, now we are on the same page, upgraded to: "arm-linux-gnueabihf-gcc (crosstool-NG linaro-1.13.1-4.7-2012.12-20121214 - Linaro GCC 2012.12) 4.7.3 20121205 (prerelease)".. With your Dialog patch, it is properly setting 1Ghz, and just keeps rebooting.. :) U-Boot 2013.01-rc2-00173-ga0d04f3 (Dec 26 2012 - 11:47:34) Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial CPU: Freescale i.MX53 family rev2.0 at 1000 MHz Reset cause: WDOG Net: FEC Warning: FEC using MAC address from net device Hit any key to stop autoboot: 0 data abort MAYBE you should read doc/README.arm-unaligned-accesses pc : [<aff72250>] lr : [<aff72228>] sp : af565d68 ip : fffffff4 fp : 00000000 r10: 00000003 r9 : affab8d9 r8 : af565f58 r7 : 00000000 r6 : e5bc345d r5 : af6df330 r4 : e5bc345d r3 : af6df334 r2 : af6df333 r1 : 00000000 r0 : af6df330 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... U-Boot 2013.01-rc2-00173-ga0d04f3 (Dec 26 2012 - 11:47:34) Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial CPU: Freescale i.MX53 family rev2.0 at 1000 MHz Reset cause: WDOG Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot