On Tue, Apr 2, 2013 at 9:17 AM, Adnan Ali <adnan....@codethink.co.uk> wrote: > Enable btrfs support in mx53loco config > > Signed-off-by: Adnan Ali <adnan....@codethink.co.uk> > --- > include/configs/mx53loco.h | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h > index a4b610f..62e9a76 100644 > --- a/include/configs/mx53loco.h > +++ b/include/configs/mx53loco.h > @@ -56,6 +56,8 @@ > #define CONFIG_GENERIC_MMC > #define CONFIG_CMD_FAT > #define CONFIG_CMD_EXT2 > +#define CONFIG_CMD_BTR > +#define CONFIG_CMD_FS_GENERIC > #define CONFIG_DOS_PARTITION > > /* Eth Configs */ > @@ -128,7 +130,7 @@ > "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ > "mmcargs=setenv bootargs console=ttymxc0,${baudrate} > root=${mmcroot}\0" \ > "loadbootscript=" \ > - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > + "btrload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
Instead of changing this to btrload for everyone, wouldn't it make more sense to use the generic "load" command? As your already setting "CONFIG_CMD_FS_GENERIC" Once you do that, you might as well also enable: #define CONFIG_CMD_EXT4 > "bootscript=echo Running bootscript from mmc ...; " \ > "source\0" \ > "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" > \ > -- > 1.7.9.5 Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot