> -----Original Message----- > From: Simon Guinot [mailto:simon.gui...@sequanux.org] > Sent: 18 June 2013 02:28 > To: Prafulla Wadaskar > Cc: Albert ARIBAUD; u-boot@lists.denx.de > Subject: [PATCH 2/3] LaCie/common: add support for the > GPIO extension bus > > This patch adds support for the GPIO extension bus > found on some LaCie > boards (as the 2Big/5Big Network v2 and the 2Big NAS). > This bus allows > to configure the devices (mostly the LEDs) connected to > a CPLD via two > GPIO-based registers (address and data).
Hi Simon The name given here for the patch as well as files "gpio-ext" is confusing for me. As you stated here those are the IOs generated by CPLD on your board which can be programmed using bit-banging on two GPIOs. So to me it those are "cpld_ios". May you please rename these files accordingly and resend the patch series for better understanding? To me "gpio-ext" is generic term application for "General purpose IOs" Regards... Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot