Hi Andreas,
Thanks for you comments, I will apply them one by one except some
confuse below.
On 07/18/2016 07:26 AM, Andreas Färber wrote:
Hi,
Isn't evb short for evaluation board? That makes board board then. ;)
Am 15.07.2016 um 10:42 schrieb Kever Yang:
RK3399 is a SoC from Rockchip with dual-core Cortex-A72
and qual-core Cortex-A53 CPU. It supports two USB3.0
quad-core
type-C ports and two USB2.0 EHCI ports. Other interfaces
are very like RK3288, the DRAM are 32bit width address
"very much like" or "very similar to"
and support address from 0 to 4GB-128MB range.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
Changes in v3:
Rebase on patch from Andreas:
[PATCH] rockchip: Exclude rk_timer for ARM64
[PATCH] rockchip: Clean up CPU selection
Changes in v2:
fix description error on board Kconfig
arch/arm/Kconfig | 2 -
arch/arm/mach-rockchip/Kconfig | 22 ++++++++-
arch/arm/mach-rockchip/rk3399/Kconfig | 14 ++++++
arch/arm/mach-rockchip/rk3399/Makefile | 5 ++
board/rockchip/evb_rk3399/Kconfig | 15 ++++++
board/rockchip/evb_rk3399/MAINTAINERS | 0
board/rockchip/evb_rk3399/Makefile | 7 +++
board/rockchip/evb_rk3399/evb-rk3399.c | 41 +++++++++++++++++
include/configs/evb_rk3399.h | 24 ++++++++++
include/configs/rk3399_common.h | 84 ++++++++++++++++++++++++++++++++++
10 files changed, 211 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-rockchip/rk3399/Kconfig
create mode 100644 arch/arm/mach-rockchip/rk3399/Makefile
create mode 100644 board/rockchip/evb_rk3399/Kconfig
create mode 100644 board/rockchip/evb_rk3399/MAINTAINERS
create mode 100644 board/rockchip/evb_rk3399/Makefile
create mode 100644 board/rockchip/evb_rk3399/evb-rk3399.c
create mode 100644 include/configs/evb_rk3399.h
create mode 100644 include/configs/rk3399_common.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a262145..6e4d78a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -846,8 +846,6 @@ config STM32
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
- select SUPPORT_SPL
- select SPL
select OF_CONTROL
select DM
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index d3f5ffd..8499692 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -9,6 +9,10 @@ config ROCKCHIP_RK3288
video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
+ select CPU_V7
+ select RK_TIMER
You no longer define RK_TIMER - either please do (I liked it) or drop
the selection, it leads to warnings on, e.g., firefly-rk3288_defconfig
otherwise.
+ select SUPPORT_SPL
+ select SPL
config ROCKCHIP_RK3036
bool "Support Rockchip RK3036"
@@ -18,6 +22,21 @@ config ROCKCHIP_RK3036
including NEON and GPU, Mali-400 graphics, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+ select CPU_V7
+ select RK_TIMER
+ select SUPPORT_SPL
+ select SPL
+
+config ROCKCHIP_RK3399
+ bool "Support Rockchip RK3399"
+ help
+ The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
+ and qual-core Cortex-A53.
quad-core
+ including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
+ video interfaces supporting HDMI and eDP, several DDR3 options
+ and video codec support. Peripherals include Gigabit Ethernet,
+ USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
UARTs
+ select ARM64
config SYS_MALLOC_F
default y
@@ -44,8 +63,9 @@ config DM_GPIO
default y
config BLK
- default y
+ default y if CPU_V7
Needs rebasing onto u-boot-rockchip.git.
source "arch/arm/mach-rockchip/rk3288/Kconfig"
source "arch/arm/mach-rockchip/rk3036/Kconfig"
+source "arch/arm/mach-rockchip/rk3399/Kconfig"
endif
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig
b/arch/arm/mach-rockchip/rk3399/Kconfig
new file mode 100644
index 0000000..923a6de
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -0,0 +1,14 @@
+if ROCKCHIP_RK3399
+
+config TARGET_EVB_RK3399
+ bool "RK3399 evb board"
Should this be enclosed in a choice section for futureproofness?
+
+config SYS_SOC
+ default "rockchip"
+
+config SYS_MALLOC_F_LEN
+ default 0x0800
+
+source "board/rockchip/evb_rk3399/Kconfig"
+
+endif
diff --git a/arch/arm/mach-rockchip/rk3399/Makefile
b/arch/arm/mach-rockchip/rk3399/Makefile
new file mode 100644
index 0000000..ca69207
--- /dev/null
+++ b/arch/arm/mach-rockchip/rk3399/Makefile
@@ -0,0 +1,5 @@
+#
+# Copyright (C) 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
Needed?
diff --git a/board/rockchip/evb_rk3399/Kconfig
b/board/rockchip/evb_rk3399/Kconfig
new file mode 100644
index 0000000..412b81c
--- /dev/null
+++ b/board/rockchip/evb_rk3399/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_EVB_RK3399
+
+config SYS_BOARD
+ default "evb_rk3399"
+
+config SYS_VENDOR
+ default "rockchip"
+
+config SYS_CONFIG_NAME
+ default "evb_rk3399"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS
b/board/rockchip/evb_rk3399/MAINTAINERS
new file mode 100644
index 0000000..e69de29
diff --git a/board/rockchip/evb_rk3399/Makefile
b/board/rockchip/evb_rk3399/Makefile
new file mode 100644
index 0000000..aaa51c2
--- /dev/null
+++ b/board/rockchip/evb_rk3399/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += evb-rk3399.o
diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c
b/board/rockchip/evb_rk3399/evb-rk3399.c
new file mode 100644
index 0000000..357b08b
--- /dev/null
+++ b/board/rockchip/evb_rk3399/evb-rk3399.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <dm.h>
Needed? Order/spacing.
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region rk3399_mem_map[] = {
+ {
+ .base = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .base = 0xf0000000UL,
+ .size = 0x10000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = rk3399_mem_map;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = 0x80000000;
+ return 0;
+}
You'll need to implement dram_init_banksize() to avoid "DRAM: 0 Bytes"?
I doesn't get "DRAM: 0 Bytes", I get "DRAM: 2 GiB"
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
new file mode 100644
index 0000000..1c13e2e
--- /dev/null
+++ b/include/configs/rk3399_common.h
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_RK3399_COMMON_H
+#define __CONFIG_RK3399_COMMON_H
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#include <asm/arch/hardware.h>
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_BAUDRATE 1500000
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_NS16550
Please make this a Kconfig selection to avoid confusion.
OK, actually, I want to know how to decide where to put the CONFIG_
MACROs, we have defconfig, common config for soc, and common config
for board.
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_TEXT_BASE 0x00200000
+#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
+#define CONFIG_SYS_LOAD_ADDR 0x00800800
+
+#define CONFIG_ROCKCHIP_COMMON
This is defined by other boards, but no one seems to checks it. Suggest
to drop it here and elsewhere.
Yes, the content for CONFIG_ROCKCHIP_COMMON has been removed,
sot this MACRO is no use now.
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
+
+/* MMC/SD IP block */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
+
+#define CONFIG_DOS_PARTITION
This one is selected by config_distro_defaults.h already.
+#define CONFIG_FAT_WRITE
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
These two are selected by config_distro_bootcmd.h already.
+
+/* RAW SD card / eMMC locations. */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
+#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+
+/* FAT sd card locations. */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_PINCTRL_SUPPORT
+#define CONFIG_SPL_RAM_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
Given that you moved SPL to rk3288, these are quite a few unneeded SPL
symbols?
+
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_NR_DRAM_BANKS 1
+#define SDRAM_BANK_SIZE (2UL << 30)
Move size into evb config? (commit message says up to ~4GB)
Possibly move banks too or is it always 1?
Rockchip evb is is combined by a mainboard and a daughter board
which daughter board usually including rk3399, DRAM, eMMC, the
DRAM could be 2GB or 4GB. The rk3399 SoC can support up to 4G-128M,
but for U-Boot, we don't actually using so large space, maybe 128MB is
enough.
So we prefer to using a 2GB config for compatible, which also easy to setup
to MMU table.
Thanks,
- Kever
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "scriptaddr=0x00000000\0" \
+ "pxefile_addr_r=0x00100000\0" \
+ "fdt_addr_r=0x01f00000\0" \
+ "kernel_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x04000000\0"
+
+/* First try to boot from SD (index 0), then eMMC (index 1 */
")" missing.
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+#endif
+
+#endif
Regards,
Andreas
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot