Hi Michael,
On 07/26/2016 04:37 PM, Michael Trimarchi wrote:
Hi
On Tue, Jul 26, 2016 at 9:56 AM, Kever Yang <kever.y...@rock-chips.com> wrote:
The calculation of "dev_desc->lba - 34 - 1 - offset" is not correct for
size '-', because both fist_usable_lba and last_usable_lba will remain
34 sectors.
We can simply use 0 for size '-' because the part_efi module will decode
the size and auto extend the size to maximum available size.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
cmd/gpt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/cmd/gpt.c b/cmd/gpt.c
index 3d9706b..897596a 100644
--- a/cmd/gpt.c
+++ b/cmd/gpt.c
@@ -298,8 +298,8 @@ static int set_gpt_info(struct blk_desc *dev_desc,
if (extract_env(val, &p))
p = val;
if ((strcmp(p, "-") == 0)) {
- /* remove first usable lba and last block */
- parts[i].size = dev_desc->lba - 34 - 1 - offset;
+ /* Let part efi module to auto extend the size */
+ parts[i].size = 0;
gpt verify give you success?
Yes.
I use below gpt table and "gpt write mmc 0 $partitions" command to do
the test:
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=boot,size=32M,uuid=${uuid_gpt_boot};" \
"name=rootfs,size=-,uuid=${uuid_gpt_rootfs};"
Without this patch, I get message:
=> gpt write mmc 0 $partitions
Writing GPT: Partitions layout exceds disk size
error!
After I apply this patch, I get below message:
Writing GPT: success!
Thanks,
- Kever
Michael
} else {
size_ll = ustrtoull(p, &p, 0);
parts[i].size = lldiv(size_ll, dev_desc->blksz);
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
