On Oct 15, 2009, at 8:47 AM, Anton Vorontsov wrote: > To make QE UART usable by Linux we should setup pin multiplexing > and turn UCC2 Ethernet node into UCC2 QE UART node. > > Also, QE UART is mutually exclusive with UART0, so we can't enable > it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype > board with eSDHC in 1- or 4-bits mode. > > Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com> > --- > board/freescale/mpc8569mds/bcsr.h | 1 + > board/freescale/mpc8569mds/mpc8569mds.c | 98 ++++++++++++++++++++++ > ++------- > 2 files changed, 78 insertions(+), 21 deletions(-)
applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot