Dear Tom, In message <4bb9dddd.3040...@windriver.com> you wrote: > Wolfgang, > > I have rebased arm/next to master. > These are the changes. > > Tom > > > The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af: > Wolfgang Denk (1): > Merge branch 'next' > > are available in the git repository at: > > git://git.denx.de/u-boot-arm master > > Achim Ehrlich (1): > Convert at91 watchdog driver to new SoC access > > Alessandro Rubini (1): > Nomadik: fix reset_timer() > > Asen Dimov (1): > using AT91_PMC_MCKR_MDIV_ instead of LEGACY one in at91/clock.c > > Daniel Gorsulowski (1): > at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT > > Detlev Zundel (1): > arm/integrator: Remove unneccessary CONFIG_PCI check. > > Joonyoung Shim (1): > s3c64xx: Add ifdef at the S3C64XX only codes > > Matthias Fuchs (1): > at91: use C structs for AT91 OHCI code > > Matthias Kaehlcke (2): > ep93xx timer: Rename struct timer_reg pointers > ep93xx timer: refactoring > > Minkyu Kang (3): > MAINTAINERS: sort the list of ARM Maintainers by last name > s5pc1xx: support the GPIO interface > s5pc1xx: update the README file > > Naveen Krishna CH (4): > S5PC100: Moves the Macros to a common header file > S5PC100: Memory SubSystem Header file, register description(SROMC). > S5PC100: Function to configure the SROMC registers. > SAMSUNG: SMDKC100: Adds ethernet support. > > Vipin KUMAR (1): > SPEAr : Adding maintainer name for spear SoCs > > MAINTAINERS | 29 ++++--- > board/armltd/integrator/integrator.c | 2 - > board/samsung/smdkc100/smdkc100.c | 39 +++++++++ > cpu/arm1176/cpu.c | 2 + > cpu/arm1176/start.S | 4 + > cpu/arm920t/ep93xx/timer.c | 62 +++++++-------- > cpu/arm926ejs/at91/clock.c | 3 +- > cpu/arm926ejs/nomadik/timer.c | 15 +++- > cpu/arm_cortexa8/s5pc1xx/Makefile | 2 + > cpu/arm_cortexa8/s5pc1xx/clock.c | 7 +-- > cpu/arm_cortexa8/s5pc1xx/gpio.c | 143 > ++++++++++++++++++++++++++++++++++ > cpu/arm_cortexa8/s5pc1xx/sromc.c | 53 +++++++++++++ > doc/README.s5pc1xx | 18 ++++- > drivers/usb/host/ohci-at91.c | 28 +++---- > drivers/watchdog/at91sam9_wdt.c | 21 +++--- > include/asm-arm/arch-at91/at91_pmc.h | 23 ++++- > include/asm-arm/arch-s5pc1xx/clk.h | 6 ++ > include/asm-arm/arch-s5pc1xx/gpio.h | 29 +++++++ > include/asm-arm/arch-s5pc1xx/smc.h | 53 +++++++++++++ > include/configs/meesc.h | 1 - > include/configs/otc570.h | 1 - > include/configs/smdkc100.h | 12 +++- > 22 files changed, 463 insertions(+), 90 deletions(-) > create mode 100644 cpu/arm_cortexa8/s5pc1xx/gpio.c > create mode 100644 cpu/arm_cortexa8/s5pc1xx/sromc.c > create mode 100644 include/asm-arm/arch-s5pc1xx/smc.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de I have never understood the female capacity to avoid a direct answer to any question. -- Spock, "This Side of Paradise", stardate 3417.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot