On Thu, 2010-11-04 at 14:22 -0400, Haiying Wang wrote: > On Thu, 2010-11-04 at 09:36 -0700, Peter Tyser wrote: > > Glad to hear. I'll submit an official patch shortly. Just to make > > sure, have you tried running one of the nand-spl images after the > > patch > > I sent yesterday? It'd be good to get confirmation that the > > -gc-sections doesn't have any accidental side effects as I wasn't able > > to test it. > Because of the second bug, I can not test it based on the top of the > uboot tree. I just use 2010.06 version plus your two patches, and run > the nand-spl image on MPC8569MDS board. Only "NAND boot... transfering > control" is printed out in the terminal. It means the final u-boot image > doesn't work. > > Then I make changes to u-boot-nand.lds and u-boot-nand_spl.lds, > following the changes you made for u-boot.lds, I get the first u-boot > line "U-Boot 2010.06..." printed out which means the final u-boot image > can work a little bit. But nothing else is showed up in terminal. > > Do you have any idea on how to make changes to u-boot-nand/_spl.lds?
I figured out the problem now. The bootpg was removed by --gc-section as well, so I need to add KEEP for it in u-boot-nand.lds. Patch will come out, I tested on MPC8569MDS board against top of the tree. Haiying _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot