Add another mux option for SAI1 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: u-b...@dh-electronics.com
Cc: uboot-st...@st-md-mailman.stormreply.com
---
arch/arm/dts/stm32mp13-pinctrl.dtsi | 32 +++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index 77a222903de..f2b41104a58 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -356,6 +356,38 @@
};
};
+ sai1a_pins_a: sai1a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */
+ <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */
+ <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai1a_sleep_pins_a: sai1a-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A
*/
+ <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */
+ <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A
*/
+ };
+ };
+
+ sai1b_pins_a: sai1b-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai1b_sleep_pins_a: sai1b-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */
+ };
+ };
+
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
--
2.43.0
