Pinctrl must be configured for eMMC, SD-card and SPI flash to
successfully read FIT from all possible fallback media in SPL.
Include pinctrl props and enable the SPL_PINCTRL Kconfig option to
ensure FIT can be loaded from eMMC, SD-card and SPI flash.
Also enable the SPL_DM_SEQ_ALIAS Kconfig option to ensure that the
storage device sequence number matches in both SPL and U-Boot proper.
Fixes: 9fdd9a546986 ("board: rockchip: add Rockchip Toybrick TB-RK3588X board")
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
v3: Drop PHY_ROCKCHIP_NANENG_COMBOPHY, usb3/sata/pcie is not enabled
v3: Split Makefile changes to a separate patch
v2: Fix Makefile entry from .dts to .dtb (Quentin)
---
configs/toybrick-rk3588_defconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/configs/toybrick-rk3588_defconfig
b/configs/toybrick-rk3588_defconfig
index 38fc7906eef2..8d773603db0b 100644
--- a/configs/toybrick-rk3588_defconfig
+++ b/configs/toybrick-rk3588_defconfig
@@ -33,8 +33,9 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
@@ -53,6 +54,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DWC_ETH_QOS=y
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_SPL_PINCTRL=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
--
2.43.2
