Include imx8mq-u-boot.dtsi in the board -u-boot.dtsi to pull in binman configuration instead of duplicating it in the board -u-boot.dtsi again. Drop the duplicate binman configuration.
Signed-off-by: Marek Vasut <ma...@denx.de> --- Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com> Cc: Adam Ford <aford...@gmail.com> Cc: Alper Nebi Yasak <alpernebiya...@gmail.com> Cc: Andrejs Cainikovs <andrejs.cainik...@toradex.com> Cc: Angus Ainslie <an...@akkea.ca> Cc: Emanuele Ghidoli <emanuele.ghid...@toradex.com> Cc: Fabio Estevam <feste...@gmail.com> Cc: Francesco Dolcini <francesco.dolc...@toradex.com> Cc: Marcel Ziswiler <marcel.ziswi...@toradex.com> Cc: Rasmus Villemoes <rasmus.villem...@prevas.dk> Cc: Simon Glass <s...@chromium.org> Cc: Stefan Eichenberger <stefan.eichenber...@toradex.com> Cc: Stefano Babic <sba...@denx.de> Cc: Tim Harvey <thar...@gateworks.com> Cc: Tom Rini <tr...@konsulko.com> Cc: ker...@puri.sm Cc: u-b...@dh-electronics.com Cc: u-boot@lists.denx.de --- V2: No change --- arch/arm/dts/imx8mq-cm-u-boot.dtsi | 111 +---------------------------- 1 file changed, 1 insertion(+), 110 deletions(-) diff --git a/arch/arm/dts/imx8mq-cm-u-boot.dtsi b/arch/arm/dts/imx8mq-cm-u-boot.dtsi index e23998f5aba..819501337e9 100644 --- a/arch/arm/dts/imx8mq-cm-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-cm-u-boot.dtsi @@ -3,11 +3,7 @@ * Copyright 2019 NXP */ -/ { - binman: binman { - multiple-images; - }; -}; +#include "imx8mq-u-boot.dtsi" &pinctrl_uart1 { bootph-pre-ram; @@ -16,108 +12,3 @@ &uart1 { bootph-pre-ram; }; - -&binman { - u-boot-spl-ddr { - filename = "u-boot-spl-ddr.bin"; - pad-byte = <0xff>; - align-size = <4>; - align = <4>; - - u-boot-spl { - align-end = <4>; - }; - - ddr-1d-imem-fw { - filename = "lpddr4_pmu_train_1d_imem.bin"; - type = "blob-ext"; - align-end = <4>; - }; - - ddr-1d-dmem-fw { - filename = "lpddr4_pmu_train_1d_dmem.bin"; - type = "blob-ext"; - align-end = <4>; - }; - - ddr-2d-imem-fw { - filename = "lpddr4_pmu_train_2d_imem.bin"; - type = "blob-ext"; - align-end = <4>; - }; - - ddr-2d-dmem-fw { - filename = "lpddr4_pmu_train_2d_dmem.bin"; - type = "blob-ext"; - align-end = <4>; - }; - }; - - flash { - mkimage { - args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000"; - - blob { - filename = "u-boot-spl-ddr.bin"; - }; - }; - }; - - itb { - filename = "u-boot.itb"; - - fit { - description = "Configuration to load ATF before U-Boot"; - #address-cells = <1>; - fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; - - images { - uboot { - description = "U-Boot (64-bit)"; - type = "standalone"; - arch = "arm64"; - compression = "none"; - load = <CONFIG_TEXT_BASE>; - - uboot_blob: blob-ext { - filename = "u-boot-nodtb.bin"; - }; - }; - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - load = <0x910000>; - entry = <0x910000>; - - atf_blob: blob-ext { - filename = "bl31.bin"; - }; - }; - - fdt { - description = "NAME"; - type = "flat_dt"; - compression = "none"; - - uboot_fdt_blob: blob-ext { - filename = "u-boot.dtb"; - }; - }; - }; - - configurations { - default = "conf"; - - conf { - description = "NAME"; - firmware = "uboot"; - loadables = "atf"; - fdt = "fdt"; - }; - }; - }; - }; -}; -- 2.43.0