** Description changed: i am now using Ubuntu 9.04 on IBM Thinkpad T20 upgraded from the repo - the system fail to shut down. occurs on the screen [ 4786.298502] System Halted every time i shut down the system. when it reach the state, i have to push the power button for about 3 seconds. when i start the system back, the screen will hang blank just before the user login process. to solve this, i have to unplug first the power adapter. The hang blank screen also occurs if i plug the battery. i had never tried using the system without the power adapter since the battery only last for about a minute. i've been facing this problem since Ubuntu 8.10. it sometimes occurs on Ubuntu 8.04 with my Acer Aspire 5650 system. + + + <--- update (05/03/2009 Sunday) + + kernel version: 2.6.28-11 + Graphics Chip Mfgr: S3 Inc. + Graphics Chip Model: S3 Inc. 86C270-294 Savage/IX-MV (rev 11) + File System Type for /: ext3 + Is this problem on a Laptop: yes + Laptop mfgr: International Business Machine IBM + Laptop model: Thinkpad T20 + + Is this problem on a Desktop: no (unknown) + Desktop mobo mfgr: - + Desktop mobo model: - + + using wireless: yes (sometimes) 3Com OfficeConnect Wireless 11g PC Card 3CRWE154G72 + ethernet card driver: + + using wired: 3Com Corporation 3c556B CardBus [Tornado] (rev 20) + ethernet card driver: 3c59x + + bios mfgr: IBM Thinkpad BIOS 4.0 Release 6.0 Phoenix Technologies + (From BIOS setup): BIOS Version 1.07 (IYET43WW) + BIOS Date 1999-12-21 + using Compiz: added - not using + using Kde: no + using Gnome (metacity): yes + + + <--- Copied from terminal + + mizzud...@linuxrules:~$ lspci -vvv + 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- + Latency: 64 + Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] + Capabilities: <access denied> + Kernel driver in use: agpgart-intel + Kernel modules: intel-agp + + 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) + Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 128 + Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 + I/O behind bridge: 0000f000-00000fff + Memory behind bridge: f0000000-f7ffffff + Prefetchable memory behind bridge: 30000000-300fffff + Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ + PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- + Kernel modules: shpchp + + 00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03) + Subsystem: IBM Device 0130 + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 168, Cache Line Size: 128 bytes + Interrupt: pin A routed to IRQ 11 + Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K] + Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 + Memory window 0: 20000000-23fff000 (prefetchable) + Memory window 1: 24000000-27fff000 + I/O window 0: 00001400-000014ff + I/O window 1: 00002400-000024ff + BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ + 16-bit legacy interface ports at 0001 + Kernel driver in use: yenta_cardbus + Kernel modules: yenta_socket + + 00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03) + Subsystem: IBM Device 0130 + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 168, Cache Line Size: 128 bytes + Interrupt: pin B routed to IRQ 11 + Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K] + Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 + Memory window 0: 28000000-2bfff000 (prefetchable) + Memory window 1: 2c000000-2ffff000 + I/O window 0: 00002800-000028ff + I/O window 1: 00002c00-00002cff + BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ + 16-bit legacy interface ports at 0001 + Kernel driver in use: yenta_cardbus + Kernel modules: yenta_socket + + 00:03.0 Ethernet controller: 3Com Corporation 3c556B CardBus [Tornado] (rev 20) + Subsystem: 3Com Corporation Device 6356 + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes + Interrupt: pin A routed to IRQ 11 + Region 0: I/O ports at 1800 [size=256] + Region 1: Memory at e8101400 (32-bit, non-prefetchable) [size=128] + Region 2: Memory at e8101000 (32-bit, non-prefetchable) [size=128] + [virtual] Expansion ROM at 30100000 [disabled] [size=128K] + Capabilities: <access denied> + Kernel driver in use: 3c59x + Kernel modules: 3c59x + + 00:03.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 20) + Subsystem: 3Com Corporation Device 6159 + Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin A routed to IRQ 11 + Region 0: I/O ports at 2000 [size=256] + Region 1: Memory at e8101c00 (32-bit, non-prefetchable) [size=256] + Region 2: Memory at e8101800 (32-bit, non-prefetchable) [size=128] + Capabilities: <access denied> + + 00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01) + Subsystem: IBM Device 0153 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 64 (1000ns min, 6000ns max) + Interrupt: pin A routed to IRQ 11 + Region 0: Memory at e8100000 (32-bit, non-prefetchable) [size=4K] + Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=1M] + Capabilities: <access denied> + Kernel driver in use: Sound Fusion CS46xx + Kernel modules: snd-cs46xx + + 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) + Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + + 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 64 + Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] + Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] + Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] + Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] + Region 4: I/O ports at 1c00 [size=16] + Kernel driver in use: ata_piix + + 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 64 + Interrupt: pin D routed to IRQ 11 + Region 4: I/O ports at 1c20 [size=32] + Kernel driver in use: uhci_hcd + + 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) + Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Interrupt: pin ? routed to IRQ 9 + Kernel modules: i2c-piix4 + + 01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 11) + Subsystem: IBM Device 017f + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes + Interrupt: pin A routed to IRQ 11 + Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M] + [virtual] Expansion ROM at 30000000 [disabled] [size=64K] + Capabilities: <access denied> + Kernel modules: savagefb
-- jaunty fails to shut down from FUSA https://bugs.launchpad.net/bugs/370222 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
