Hi again Brian,
Attached are the outputs of the lspci -vvnn and dmesg commands.
The output of the asoundconf list command is: V8235.
I tried 2 other things today. I borrowed a HDD, installed it, and
let Feisty take all of its 40GB to install itself in. I couldn't see
how that would change anything, but wondered if having all those OSs on
one HDD might cause "strange" things to happen, so thought I'd give it a
try. Same results as before. Then I'd also borrowed a SoundBlaster
sound card, thinking maybe the mobo onboard sound was causing the
problems -- installed the SB card and things were even flakier than
before. Returned the system to what it was before, then ran the
commands you asked for and got the outputs mentioned above.
Thank you in advance for your help.
Jerry
> Brian Murray wrote:
>
>> Thanks for your bug report. Could you please add the output of 'lspci
>> -vvnn', 'asoundconf list' and 'dmesg'? Thanks in advance.
>>
>> ** Changed in: Ubuntu
>> Assignee: (unassigned) => Brian Murray
>> Status: Unconfirmed => Needs Info
>>
>>
>
>
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8378 [KM400/A] Chipset
Host Bridge [1106:3205]
Subsystem: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
[1106:3205]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e4000000-e7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:08.0 Communication controller [0780]: Agere Systems V.92 56K WinModem
[11c1:048c] (rev 02)
Subsystem: Agere Systems Unknown device [11c1:044c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at d000 [size=8]
Region 2: I/O ports at d400 [size=256]
Capabilities: <access denied>
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at ea001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e400 [size=16]
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: Jetway Information Co., Ltd. Unknown device [16f3:4765]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Capabilities: <access denied>
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet
Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at ea002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. VT8378 [S3
UniChrome] Integrated Video [1106:7205] (rev 01) (prog-if 00 [VGA])
Subsystem: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated
Video [1106:7205]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at e9000000 [disabled] [size=64K]
Capabilities: <access denied>
[ 0.000000] Linux version 2.6.20-6-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31
20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00
end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000002bef0000
end: 000000002bff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000002bff0000 size: 0000000000003000
end: 000000002bff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000002bff3000 size: 000000000000d000
end: 000000002c000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002bff0000 (usable)
[ 0.000000] BIOS-e820: 000000002bff0000 - 000000002bff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002bff3000 - 000000002c000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 703MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 180208) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 180208
[ 0.000000] HighMem 180208 -> 180208
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 180208
[ 0.000000] On node 0 totalpages: 180208
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1375 pages used for memmap
[ 0.000000] Normal zone: 174737 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 KM400 ) @
0x000f7340
[ 0.000000] ACPI: RSDT (v001 KM400 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x2bff3000
[ 0.000000] ACPI: FADT (v001 KM400 AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x2bff3040
[ 0.000000] ACPI: DSDT (v001 KM400 AWRDACPI 0x00001000 MSFT 0x0100000e) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
2c000000:d3ff0000)
[ 0.000000] Detected 1907.789 MHz processor.
[ 15.755391] Built 1 zonelists. Total pages: 178801
[ 15.755396] Kernel command line:
root=UUID=f335057b-a78c-44bc-a7bf-be8d903a2186 ro quiet splash
[ 15.755575] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 15.755586] mapped APIC to ffffd000 (0158c000)
[ 15.755591] Enabling fast FPU save and restore... done.
[ 15.755593] Enabling unmasked SIMD FPU exception support... done.
[ 15.755606] Initializing CPU#0
[ 15.755696] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 15.756941] Console: colour VGA+ 80x25
[ 15.757994] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.758674] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.781628] Memory: 703716k/720832k available (1975k kernel code, 16488k
reserved, 878k data, 324k init, 0k highmem)
[ 15.781640] virtual kernel memory layout:
[ 15.781641] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.781642] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.781643] vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB)
[ 15.781645] lowmem : 0xc0000000 - 0xebff0000 ( 703 MB)
[ 15.781646] .init : 0xc03cf000 - 0xc0420000 ( 324 kB)
[ 15.781647] .data : 0xc02edd14 - 0xc03c96d4 ( 878 kB)
[ 15.781649] .text : 0xc0100000 - 0xc02edd14 (1975 kB)
[ 15.781652] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 15.859555] Calibrating delay using timer specific routine.. 3819.03
BogoMIPS (lpj=7638065)
[ 15.859608] Security Framework v1.0.0 initialized
[ 15.859616] SELinux: Disabled at boot.
[ 15.859637] Mount-cache hash table entries: 512
[ 15.859813] CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000
00000000 00000000 00000000 00000000
[ 15.859824] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.859827] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.859830] CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420
00000000 00000000 00000000
[ 15.859854] Checking 'hlt' instruction... OK.
[ 15.875678] SMP alternatives: switching to UP code
[ 15.875950] Freeing SMP alternatives: 11k freed
[ 15.876078] ACPI: Core revision 20060707
[ 15.882000] ACPI: setting ELCR to 0200 (from 0e20)
[ 15.883985] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 15.883995] SMP motherboard not detected.
[ 15.883998] Local APIC not detected. Using dummy APIC emulation.
[ 15.884056] Brought up 1 CPUs
[ 15.884337] Booting paravirtualized kernel on bare hardware
[ 15.884425] NET: Registered protocol family 16
[ 15.884544] EISA bus registered
[ 15.884549] ACPI: bus type pci registered
[ 15.892785] PCI: PCI BIOS revision 2.10 entry at 0xfb610, last bus=1
[ 15.892787] PCI: Using configuration type 1
[ 15.892789] Setting up standard PCI resources
[ 15.905306] ACPI: Interpreter enabled
[ 15.905309] ACPI: Using PIC for interrupt routing
[ 15.905939] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.905945] PCI: Probing PCI hardware (bus 00)
[ 15.906058] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 15.906531] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 15.906536] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 15.906760] Boot video device is 0000:01:00.0
[ 15.906803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.937125] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 15.937478] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 15.937833] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 15.938185] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
[ 15.938505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 15.938817] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 15.939128] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 15.939452] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 15.943167] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.943178] pnp: PnP ACPI init
[ 15.948001] pnp: PnP ACPI: found 15 devices
[ 15.948006] PnPBIOS: Disabled by ACPI PNP
[ 15.948066] PCI: Using ACPI for IRQ routing
[ 15.948069] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 15.969317] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[ 15.969321] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 15.969578] PCI: Bridge: 0000:00:01.0
[ 15.969581] IO window: disabled.
[ 15.969586] MEM window: e8000000-e9ffffff
[ 15.969590] PREFETCH window: e4000000-e7ffffff
[ 15.969609] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.969644] NET: Registered protocol family 2
[ 16.007464] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.007777] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 16.009730] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.010623] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.010626] TCP reno registered
[ 16.019517] checking if image is initramfs... it is
[ 16.591649] Freeing initrd memory: 6396k freed
[ 16.592178] audit: initializing netlink socket (disabled)
[ 16.592196] audit(1171320800.024:1): initialized
[ 16.592324] VFS: Disk quotas dquot_6.5.1
[ 16.592346] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.592405] io scheduler noop registered
[ 16.592408] io scheduler anticipatory registered
[ 16.592411] io scheduler deadline registered
[ 16.592418] io scheduler cfq registered (default)
[ 16.592695] isapnp: Scanning for PnP cards...
[ 16.946172] isapnp: No Plug & Play device found
[ 16.973274] Real Time Clock Driver v1.12ac
[ 16.973337] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 16.973478] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.973625] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.974235] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.974483] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.974743] mice: PS/2 mouse device common for all mice
[ 16.975438] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 16.975632] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 16.975637] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 16.975906] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 16.976161] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.976166] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.976302] EISA: Probing bus 0 at eisa.0
[ 16.976324] Cannot allocate resource for EISA slot 4
[ 16.976327] Cannot allocate resource for EISA slot 5
[ 16.976341] EISA: Detected 0 cards.
[ 17.006533] TCP cubic registered
[ 17.006541] NET: Registered protocol family 1
[ 17.006548] NET: Registered protocol family 8
[ 17.006550] NET: Registered protocol family 20
[ 17.006590] Using IPI No-Shortcut mode
[ 17.006675] ACPI: (supports S0 S1 S4 S5)
[ 17.007198] Freeing unused kernel memory: 324k freed
[ 17.009933] Time: tsc clocksource has been installed.
[ 17.018137] input: AT Translated Set 2 keyboard as /class/input/input0
[ 18.227302] Capability LSM initialized
[ 18.258695] ACPI: Fan [FAN] (on)
[ 18.262977] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 18.264375] ACPI: Thermal Zone [THRM] (41 C)
[ 18.754112] usbcore: registered new interface driver usbfs
[ 18.754146] usbcore: registered new interface driver hub
[ 18.754174] usbcore: registered new device driver usb
[ 18.755022] USB Universal Host Controller Interface driver v3.0
[ 18.755601] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 18.755606] PCI: setting IRQ 10 as level-triggered
[ 18.755611] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 18.755626] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 18.755840] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 18.755871] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000d800
[ 18.756013] usb usb1: configuration #1 chosen from 1 choice
[ 18.756042] hub 1-0:1.0: USB hub found
[ 18.756054] hub 1-0:1.0: 2 ports detected
[ 18.860016] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 18.860023] PCI: setting IRQ 11 as level-triggered
[ 18.860028] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 18.860041] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 18.860069] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 18.860098] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000dc00
[ 18.860224] usb usb2: configuration #1 chosen from 1 choice
[ 18.860256] hub 2-0:1.0: USB hub found
[ 18.860268] hub 2-0:1.0: 2 ports detected
[ 18.913473] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 18.963906] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 18.963912] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 18.963926] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 18.963957] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 18.963984] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
[ 18.964109] usb usb3: configuration #1 chosen from 1 choice
[ 18.964139] hub 3-0:1.0: USB hub found
[ 18.964152] hub 3-0:1.0: 2 ports detected
[ 3.308000] Time: acpi_pm clocksource has been installed.
[ 3.320000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 3.320000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 3.320000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 3.320000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 3.320000] ehci_hcd 0000:00:10.3: irq 10, io mem 0xea001000
[ 3.320000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 3.320000] usb usb4: configuration #1 chosen from 1 choice
[ 3.320000] hub 4-0:1.0: USB hub found
[ 3.320000] hub 4-0:1.0: 6 ports detected
[ 3.424000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 3.424000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 3.424000] VP_IDE: chipset revision 6
[ 3.424000] VP_IDE: not 100% native mode: will probe irqs later
[ 3.424000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on
pci0000:00:11.1
[ 3.424000] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA,
hdb:DMA
[ 3.424000] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA,
hdd:pio
[ 3.424000] Probing IDE interface ide0...
[ 3.840000] hda: ST380011A, ATA DISK drive
[ 4.120000] hdb: Maxtor 6Y200P0, ATA DISK drive
[ 4.176000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.176000] Probing IDE interface ide1...
[ 4.400000] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 4.536000] usb 4-3: configuration #1 chosen from 1 choice
[ 4.776000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 4.980000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.024000] usbcore: registered new interface driver libusual
[ 5.028000] SCSI subsystem initialized
[ 5.032000] Initializing USB Mass Storage driver...
[ 5.032000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 5.032000] usb-storage: device found at 3
[ 5.032000] usb-storage: waiting for device to settle before scanning
[ 5.032000] scsi1 : SCSI emulation for USB Mass Storage devices
[ 5.032000] usbcore: registered new interface driver usb-storage
[ 5.032000] USB Mass Storage support registered.
[ 5.032000] usb-storage: device found at 2
[ 5.032000] usb-storage: waiting for device to settle before scanning
[ 5.080000] hdc: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
[ 5.752000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.756000] libata version 2.00 loaded.
[ 5.760000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 5.760000] eth0: VIA Rhine II at 0x1ec00, 00:30:18:15:9a:a6, IRQ 10.
[ 5.760000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1
Link 45e1.
[ 5.768000] hda: max request size: 512KiB
[ 5.784000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 5.784000] hda: cache flushes supported
[ 5.784000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12
hda13 hda14 hda15 hda16 hda17 hda18 hda19 > hda4
[ 5.956000] hdb: max request size: 512KiB
[ 5.956000] hdb: 398297088 sectors (203928 MB) w/7936KiB Cache,
CHS=24792/255/63, UDMA(133)
[ 5.956000] hdb: cache flushes supported
[ 5.960000] hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 > hdb2
[ 6.020000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(66)
[ 6.020000] Uniform CD-ROM driver Revision: 3.20
[ 6.964000] Attempting manual resume
[ 6.984000] kjournald starting. Commit interval 5 seconds
[ 6.984000] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.032000] usb-storage: device scan complete
[ 10.032000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0026
PQ: 0 ANSI: 0
[ 10.032000] usb-storage: device scan complete
[ 10.036000] scsi 1:0:0:0: Direct-Access HP psc 2175 1.00
PQ: 0 ANSI: 2
[ 15.188000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.632000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.636000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.140000] Linux agpgart interface v0.101 (c) Dave Jones
[ 17.144000] agpgart: Detected VIA KM400/KM400A chipset
[ 17.148000] agpgart: AGP aperture is 64M @ 0xe0000000
[ 17.388000] input: PC Speaker as /class/input/input1
[ 17.584000] NET: Registered protocol family 17
[ 17.752000] Floppy drive(s): fd0 is 1.44M
[ 17.772000] FDC 0 is a post-1991 82077
[ 17.800000] irda_init()
[ 17.800000] NET: Registered protocol family 23
[ 17.840000] parport: PnPBIOS parport detected.
[ 17.840000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.020000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[ 18.280000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 18.280000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 18.768000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev
2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2B11
[ 18.768000] usbcore: registered new interface driver usblp
[ 18.768000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 18.824000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
[ 18.864000] sda: Write Protect is off
[ 18.864000] sda: Mode Sense: 02 00 00 00
[ 18.864000] sda: assuming drive cache: write through
[ 19.032000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
[ 19.032000] sda: Write Protect is off
[ 19.032000] sda: Mode Sense: 02 00 00 00
[ 19.032000] sda: assuming drive cache: write through
[ 19.032000] sda: sda1
[ 19.032000] sd 0:0:0:0: Attached scsi removable disk sda
[ 19.040000] sd 1:0:0:0: Attached scsi removable disk sdb
[ 19.068000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.068000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 19.516000] fuse init (API version 7.8)
[ 19.544000] lp0: using parport0 (interrupt-driven).
[ 19.580000] Adding 1028120k swap on
/dev/disk/by-uuid/290cedd3-b8d3-4fc3-a9e9-08b42feb2565. Priority:-1 extents:1
across:1028120k
[ 20.244000] EXT3 FS on hda18, internal journal
[ 20.696000] NET: Registered protocol family 10
[ 20.696000] lo: Disabled Privacy Extensions
[ 31.544000] eth0: no IPv6 routers present
[ 56.624000] kjournald starting. Commit interval 5 seconds
[ 56.624000] EXT3 FS on hda17, internal journal
[ 56.624000] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.644000] kjournald starting. Commit interval 5 seconds
[ 56.644000] EXT3 FS on hda19, internal journal
[ 56.644000] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.888000] ReiserFS: hda10: found reiserfs format "3.6" with standard
journal
[ 56.888000] ReiserFS: hda10: using ordered data mode
[ 56.900000] ReiserFS: hda10: journal params: device hda10, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 56.900000] ReiserFS: hda10: checking transaction log (hda10)
[ 56.932000] ReiserFS: hda10: Using r5 hash to sort names
[ 56.980000] kjournald starting. Commit interval 5 seconds
[ 56.980000] EXT3 FS on hda11, internal journal
[ 56.980000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.004000] kjournald starting. Commit interval 5 seconds
[ 57.004000] EXT3 FS on hda12, internal journal
[ 57.004000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.032000] kjournald starting. Commit interval 5 seconds
[ 57.032000] EXT3 FS on hda13, internal journal
[ 57.032000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.048000] kjournald starting. Commit interval 5 seconds
[ 57.048000] EXT3 FS on hda14, internal journal
[ 57.048000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.068000] kjournald starting. Commit interval 5 seconds
[ 57.068000] EXT3 FS on hda15, internal journal
[ 57.068000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.092000] kjournald starting. Commit interval 5 seconds
[ 57.092000] EXT3 FS on hda16, internal journal
[ 57.092000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.164000] kjournald starting. Commit interval 5 seconds
[ 57.164000] EXT3 FS on hda7, internal journal
[ 57.164000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.176000] kjournald starting. Commit interval 5 seconds
[ 57.176000] EXT3 FS on hda8, internal journal
[ 57.176000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.200000] kjournald starting. Commit interval 5 seconds
[ 57.200000] EXT3 FS on hda9, internal journal
[ 57.200000] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.308000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 57.360000] NTFS volume version 3.0.
[ 63.276000] input: Power Button (FF) as /class/input/input3
[ 63.304000] ACPI: Power Button (FF) [PWRF]
[ 63.348000] input: Power Button (CM) as /class/input/input4
[ 63.348000] ACPI: Power Button (CM) [PWRB]
[ 63.364000] input: Sleep Button (CM) as /class/input/input5
[ 63.364000] ACPI: Sleep Button (CM) [SLPB]
[ 63.504000] No dock devices found.
[ 63.552000] Using specific hotkey driver
[ 63.620000] ibm_acpi: ec object not found
[ 63.680000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 65.052000] ppdev: user-space parallel port driver
[ 65.912000] [drm] Initialized drm 1.1.0 20060810
[ 65.936000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 65.940000] [drm] Initialized via 2.10.0 20060529 on minor 0
[ 65.964000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 65.964000] agpgart: Device is in legacy mode, falling back to 2.x
[ 65.964000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 65.964000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 65.972000] [drm:via_mem_alloc] *ERROR* Attempt to allocate from
uninitialized memory manager.
[ 66.960000] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 66.960000] [<c0153ac4>] __report_bad_irq+0x24/0x80
[ 66.960000] [<c0153d7e>] note_interrupt+0x25e/0x290
[ 66.960000] [<eca2a127>] snd_via8233_interrupt+0x17/0xf0 [snd_via82xx]
[ 66.960000] [<c0152ff0>] handle_IRQ_event+0x30/0x60
[ 66.960000] [<c01548cb>] handle_level_irq+0xeb/0x120
[ 66.960000] [<c0105b50>] do_IRQ+0x40/0x80
[ 66.960000] [<c0104213>] common_interrupt+0x23/0x30
[ 66.960000] [<c012af21>] __do_softirq+0x61/0x100
[ 66.960000] [<c012b015>] do_softirq+0x55/0x60
[ 66.960000] [<c0105b55>] do_IRQ+0x45/0x80
[ 66.960000] [<c0104213>] common_interrupt+0x23/0x30
[ 66.960000] =======================
[ 66.960000] handlers:
[ 66.960000] [<ec87eee0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 66.960000] [<ec87eee0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 66.960000] [<eca2a110>] (snd_via8233_interrupt+0x0/0xf0 [snd_via82xx])
[ 66.960000] Disabling IRQ #11
[ 69.520000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 69.520000] apm: overridden by ACPI.
[ 75.952000] Bluetooth: Core ver 2.11
[ 75.952000] NET: Registered protocol family 31
[ 75.952000] Bluetooth: HCI device and connection manager initialized
[ 75.952000] Bluetooth: HCI socket layer initialized
[ 76.004000] Bluetooth: L2CAP ver 2.8
[ 76.004000] Bluetooth: L2CAP socket layer initialized
[ 76.112000] Bluetooth: RFCOMM socket layer initialized
[ 76.112000] Bluetooth: RFCOMM TTY layer initialized
[ 76.112000] Bluetooth: RFCOMM ver 1.8
[ 93.516000] eth0: no IPv6 routers present
--
system problem - sound very slow - sys delays
https://launchpad.net/bugs/84643
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
