Hi, There was no existing xorg.conf file in /etc/X11, so I created one with the following content;
Section "ServerFlags" Option "AIGLX" "off" EndSection After rebooting, I was successfully automatically logged in (which was the option I chose in my third attempt to install). The last bit of the syslog after the reboot is now Jun 26 16:09:51 saltcreek kernel: [ 16.256256] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 Jun 26 16:09:51 saltcreek kernel: [ 16.258993] agpgart-via 0000:00:00.0: AGP 3.5 bridge Jun 26 16:09:51 saltcreek kernel: [ 16.259022] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x Jun 26 16:09:51 saltcreek kernel: [ 16.259031] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode Jun 26 16:09:51 saltcreek kernel: [ 16.259087] pci 0000:01:00.0: putting AGP V2 device into 4x mode Jun 26 16:09:52 saltcreek /usr/sbin/hplj1020: foo2zjs: HP LaserJet 1020 firmware already loaded into /dev/usb/lp0 Jun 26 16:09:52 saltcreek /usr/sbin/hplj1020: foo2zjs: HP LaserJet 1020 firmware already loaded into /dev/usblp0 Jun 26 16:10:59 saltcreek kernel: [ 83.897278] usb 1-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 Jun 26 16:11:45 saltcreek kernel: [ 130.325832] usblp0: removed Since the problem occurred after 5th last line and before the firmware load, I'd say this is a successful workaround. Thank you. Cheers, Stuart Hall > Try to disable AIGLX by adding option to /etc/X11/xorg.conf file. > > ** Summary changed: > > - Haven't been able to execute normal gnome login since 10.04 > installation; screen blanks then returns to login screen > + [KM400]Haven't been able to execute normal gnome login since 10.04 > installation; screen blanks then returns to login screen > > ** Changed in: xserver-xorg-video-openchrome (Ubuntu) > Importance: Undecided => High > > ** Changed in: xserver-xorg-video-openchrome (Ubuntu) > Importance: High => Medium > > -- > [KM400]Haven't been able to execute normal gnome login since 10.04 > installation; screen blanks then returns to login screen > https://bugs.launchpad.net/bugs/589520 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “xserver-xorg-video-openchrome†package in Ubuntu: Confirmed > > Bug description: > Binary package hint: xorg > > After a fresh 10.04 installation which seemed to go perfectly, I now can't > execute a normal gnome login, but can using safe mode gnome and xterm. > When attempting a normal login there is a short wait after the login > screen disappears, then the screen goes blank for a few seconds before > returning to the login screen. > > The following lines from syslog are what make me think this is a bug; > > Jun 4 13:15:34 saltcreek acpid: client connected from 2495[0:0] > Jun 4 13:15:34 saltcreek acpid: 1 client rule loaded > Jun 4 13:15:34 saltcreek kernel: [ 1388.249939] agpgart-via 0000:00:00.0: > AGP 3.5 bridge > Jun 4 13:15:34 saltcreek kernel: [ 1388.249969] agpgart-via 0000:00:00.0: > bridge is in legacy mode, falling back to 2.x > Jun 4 13:15:34 saltcreek kernel: [ 1388.249977] agpgart-via 0000:00:00.0: > putting AGP V2 device into 4x mode > Jun 4 13:15:34 saltcreek kernel: [ 1388.250033] pci 0000:01:00.0: putting > AGP V2 device into 4x mode > Jun 4 13:15:36 saltcreek gdm-simple-greeter[2530]: Gtk-WARNING: > /build/buildd/gtk+2.0-2.20.0/gtk/gtkwidget.c:5636: widget not within a > GtkWindow > Jun 4 13:15:39 saltcreek gdm-session-worker[2532]: GLib-GObject-CRITICAL: > g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed > Jun 4 13:15:49 saltcreek kernel: [ 1403.715360] Xorg[2495]: segfault at 0 > ip 080a6712 sp bf99bd2c error 4 in Xorg[8048000+19f000] > Jun 4 13:15:50 saltcreek acpid: client 2495[0:0] has disconnected > > Ubuntu release: > ~$ lsb_release -rd > Description: Ubuntu 10.04 LTS > Release: 10.04 > > My system: > ~$ lspci > 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host > Bridge > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge > 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID > Controller (rev 80) > 00:0f.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge > [KT600/K8T800/K8T890 South] > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. > VT8233/A/8235/8237 AC97 Audio Controller (rev 60) > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev > 78) > 01:00.0 VGA compatible controller: VIA Technologies, Inc. > KM400/KN400/P4M800 [S3 UniChrome] (rev 01) > > ProblemType: Bug > DistroRelease: Ubuntu 10.04 > Package: xorg 1:7.5+5ubuntu1 > ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2 > Uname: Linux 2.6.32-21-generic i686 > Architecture: i386 > Date: Fri Jun 4 13:36:30 2010 > DkmsStatus: Error: [Errno 2] No such file or directory > InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429) > ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic > root=UUID=9a26cb71-8670-4c6c-9a21-20f8f5f804b4 ro quiet splash > ProcEnviron: > LANG=en_AU.UTF-8 > SHELL=/bin/bash > SourcePackage: xorg > Symptom: display > Title: Xorg crash > dmi.bios.date: 09/23/2004 > dmi.bios.vendor: Award Software International, Inc. > dmi.bios.version: F2 > dmi.board.name: 7VM400AM-RZ > dmi.board.vendor: Gigabyte Technology Co., Ltd. > dmi.board.version: x.x > dmi.chassis.type: 3 > dmi.modalias: > dmi:bvnAwardSoftwareInternational,Inc.:bvrF2:bd09/23/2004:svn:pn:pvr:rvnGigabyteTechnologyCo.,Ltd.:rn7VM400AM-RZ:rvrx.x:cvn:ct3:cvr: > glxinfo: Error: [Errno 2] No such file or directory > system: > distro: Ubuntu > codename: lucid > architecture: i686 > kernel: 2.6.32-21-generic > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-openchrome/+bug/589520/+subscribe > -- [KM400]Haven't been able to execute normal gnome login since 10.04 installation; screen blanks then returns to login screen https://bugs.launchpad.net/bugs/589520 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
