Op 28-08-12 19:19, Till Kamppeter schreef: > Can you run the command > > lpadmin -p <printer> -o usb-unidir-default=true
arie@ubnew1204:~$ lpstat -v device for HL-1430-series: usb://Brother/HL-1430%20series arie@ubnew1204:~$ lpadmin -p HL-1430-series -o usb-unidir-default=true > > > > Then remove all stuck jobs from the print queue and turn off and turn on > the printer. Does the problem go away now? You can print one time after this, but the next time it lasts 1 minute before it prints (normally 5 seconds) and gives a blank page. > > > If not, try the command > > lpadmin -p <printer> -o usb-no-reattach-default=true > > clear the print queue and power-cycle the printer. Does it work now? If > yes, try to remove the first workaround via arie@ubnew1204:~$ lpadmin -p HL-1430-series -o usb-no-reattach- default=true Yes, it looks ok now. > > > lpadmin -p <printer> -R usb-unidir-default > > Does it still work? Yes > > > To remove also the other workaround run > > lpadmin -p <printer> -R usb-no-reattach-default arie@ubnew1204:~$ lpadmin -p HL-1430-series -R usb-no-reattach-default > > > Please post also the output of the command > > lsusb arie@ubnew1204:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 2040:7050 Hauppauge Nova-T Stick Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 003 Device 004: ID 04f9:001a Brother Industries, Ltd HL-1430 Laser Printer > > > This way we get the USB IDs of the printer to be able to add permanent > exception rules to the CUPS USB backend. > > > ** Also affects: cups (Ubuntu) > Importance: Undecided > Status: New > > ** Changed in: cups (Ubuntu) > Status: New => Incomplete > > ** Changed in: cups (Ubuntu) > Importance: Undecided => Medium > It looks like it is ok now. I shall reboot my system and try it again. Thank you very much so far !!!! Arie -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1038695 Title: Brother HL-1430 left in wrong state after printing in 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/cups/+bug/1038695/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
