First problems during downloading updates.

~$ iwconfig wlan1
wlan1     IEEE 802.11bgn
          Mode:Managed  Frequency:2.437 GHz
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=35/70  Signal level=-75 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:324  Invalid misc:2714   Missed beacon:0

~$ dmesg | egrep '\<ath\>|ath9k'
[   91.278092] ath: EEPROM regdomain: 0x809c
[   91.278096] ath: EEPROM indicates we should expect a country code
[   91.278098] ath: doing EEPROM country->regdmn map search
[   91.278100] ath: country maps to regdmn code: 0x52
[   91.278102] ath: Country alpha2 being used: CN
[   91.278104] ath: Regpair used: 0x52
[   91.351734] ieee80211 phy0: Selected rate control algorithm 
'ath9k_rate_control'
[ 1374.857661] ath: phy0: Failed to stop TX DMA, queues=0x004!
[ 1648.808226] ath: phy0: Failed to stop TX DMA, queues=0x004!
[ 1650.241012] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1650.241031] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[ 1650.256753] ath: phy0: Failed to stop TX DMA, queues=0x005!
[ 1651.192010] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1651.204642] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1651.226379] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1651.226387] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[ 1651.241927] ath: phy0: Failed to stop TX DMA, queues=0x005!
[ 1789.144920] ath: phy0: Failed to stop TX DMA, queues=0x004!
[ 1790.790088] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1790.806831] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1790.824216] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 
AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
[ 1790.824224] ath: phy0: Could not stop RX, we could be confusing the DMA 
engine when we start RX up
[ 1790.831924] ath: phy0: Failed to stop TX DMA, queues=0x001!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1032826

Title:
  168c:0023 ath9k wifi slow, and frequently disconnects/reconnects

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1032826/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to