Public bug reported:

Hi,

i run some network-tests (iperf3) and noticed massive retransmitts in
ubuntu 20.4 with kernel 5.4.0-29. I'm using module r8169 for network-
adapter

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

if i boot my ubuntu 18.4 and did same iperf-test (same hardware, same
network configuration, other client is not rebooted) i have not these
retransmitts.

root@bpi-r2:~# iperf3 -c 192.168.0.21                                           
Connecting to host 192.168.0.21, port 5201                                      
[  5] local 192.168.0.11 port 35702 connected to 192.168.0.21 port 5201         
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd                
[  5]   0.00-1.00   sec  14.2 MBytes   119 Mbits/sec  337   14.1 KBytes         
[  5]   1.00-2.00   sec  14.9 MBytes   125 Mbits/sec  331   14.1 KBytes         
[  5]   2.00-3.00   sec  15.1 MBytes   126 Mbits/sec  296   19.8 KBytes         
[  5]   3.00-4.00   sec  14.7 MBytes   124 Mbits/sec  314   14.1 KBytes         
[  5]   4.00-5.00   sec  12.8 MBytes   107 Mbits/sec  259   14.1 KBytes         
[  5]   5.00-6.01   sec  67.4 MBytes   560 Mbits/sec  137    362 KBytes         
[  5]   6.01-7.00   sec   111 MBytes   940 Mbits/sec    0    366 KBytes         
[  5]   7.00-8.00   sec   112 MBytes   941 Mbits/sec    0    409 KBytes         
[  5]   8.00-9.00   sec   112 MBytes   940 Mbits/sec    0    421 KBytes         
[  5]   9.00-10.00  sec   112 MBytes   936 Mbits/sec    0    426 KBytes         
- - - - - - - - - - - - - - - - - - - - - - - - -                               
[ ID] Interval           Transfer     Bitrate         Retr                      
[  5]   0.00-10.00  sec   586 MBytes   491 Mbits/sec  1674             sender   
[  5]   0.00-10.01  sec   585 MBytes   491 Mbits/sec                  receiver  
                                                                                
iperf Done.

2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP 
group default qlen 1000
    link/ether e4:b9:7a:f7:c4:8b brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.21/24 brd 192.168.0.255 scope global dynamic noprefixroute 
enp3s0
       valid_lft 171856sec preferred_lft 171856sec
    inet6 fe80::781a:829f:5030:ad6a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

$ ethtool -S enp3s0 
NIC statistics:
     tx_packets: 571053
     rx_packets: 1184934
     tx_errors: 0
     rx_errors: 0
     rx_missed: 1919  <<<<<<<<<<<<<<<<<<<<<<<<<<<
     align_errors: 0
     tx_single_collisions: 0
     tx_multi_collisions: 0
     unicast: 1184926
     broadcast: 6
     multicast: 2
     tx_aborted: 0
     tx_underrun: 0

2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP 
mode DEFAULT group default qlen 1000
    link/ether e4:b9:7a:f7:c4:8b brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast   
    1785166133 1184970  0       0       0       2       
    TX: bytes  packets  errors  dropped carrier collsns 
    39395440   570500   0       0       0       0  

on the other side i see dropped packets, maybe flowcontrol-related?

ethtool reports "Link partner advertised pause frame use: Symmetric" but
maybe flowcontrol is not working...

also driver reports flowcontrol is enabled...

$ dmesg | grep r8169
[    0.939358] libphy: r8169: probed
[    0.939491] r8169 0000:03:00.0 eth0: RTL8168h/8111h, e4:b9:7a:f7:c4:8b, XID 
541, IRQ 128
[    0.939492] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx 
checksumming: ko]
[    0.986853] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    3.478981] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver 
[Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    3.591124] r8169 0000:03:00.0 enp3s0: Link is Down
[    7.171198] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow 
control rx/tx

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: linux-image-5.4.0-29-generic 5.4.0-29.33
ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30
Uname: Linux 5.4.0-29-generic x86_64
ApportVersion: 2.20.11-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  frank      1427 F.... pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: GNOME-Flashback:GNOME
Date: Fri May 22 06:49:34 2020
InstallationDate: Installed on 2020-04-27 (24 days ago)
InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423)
MachineType: Dell Inc. G5 5590
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-29-generic 
root=UUID=7c9113b7-ca65-4c46-9435-f5d2b73bab72 ro quiet
RelatedPackageVersions:
 linux-restricted-modules-5.4.0-29-generic N/A
 linux-backports-modules-5.4.0-29-generic  N/A
 linux-firmware                            1.187
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 02/07/2020
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.12.0
dmi.board.name: 0KW84T
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvr1.12.0:bd02/07/2020:svnDellInc.:pnG55590:pvr:rvnDellInc.:rn0KW84T:rvrA00:cvnDellInc.:ct10:cvr:
dmi.product.family: GSeries
dmi.product.name: G5 5590
dmi.product.sku: 08EA
dmi.sys.vendor: Dell Inc.

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1880076

Title:
  ubuntu 20.4 - retransmitts with r8169

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1880076/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to