Package: linux-ubuntu-modules-2.6.24-19-generic
Status: install ok installed
Priority: optional
Section: base
the output for dpkg -s linux-ubuntu-modules-$(uname -r)
Installed-Size: 15280
Maintainer: Ubuntu Kernel Team <[EMAIL PROTECTED]>
Architecture: i386
Source: linux-ubuntu-modules-2.6.24
Version: 2.6.24-19.28
Provides: ndiswrapper-modules-1.9
Depends: linux-image-2.6.24-19-generic
Pre-Depends: dpkg (>= 1.10.24)
Description: Ubuntu supplied Linux modules for version 2.6.24 on x86/x86_64
This package contains modules supplied by Ubuntu for Linux kernel 2.6.24 on
x86/x86_64.
.
You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
attached find the output from uname -a > uname-a.log
even when running a sudo command or logged in as root i could not
process the ./alsa-info.sh --no-upload command it denied permission so
i followed the manual steps and here is my output
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: Conexant Digital [Conexant Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d8100000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d8200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d8180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d8240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 1820 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d8000000-d80fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family)
SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 221
Region 0: I/O ports at 18d0 [size=8]
Region 1: I/O ports at 18c4 [size=4]
Region 2: I/O ports at 18c8 [size=8]
Region 3: I/O ports at 18c0 [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at d8444400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 4
Region 4: I/O ports at 18e0 [size=32]
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
Network Connection [8086:4222] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:135b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 220
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
05:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d8001000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
05:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 19)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 16
Region 0: Memory at d8001800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
05:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller
[1180:0843] (rev 0a)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 0: Memory at d8001c00 (32-bit, non-prefetchable) [disabled]
[size=256]
Capabilities: <access denied>
05:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 05)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 0: Memory at d8002000 (32-bit, non-prefetchable) [disabled]
[size=256]
Capabilities: <access denied>
05:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
05:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VE Network
Connection [8086:1092] (rev 02)
Subsystem: Hewlett-Packard Company Unknown device [103c:30bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 4000 [size=64]
Capabilities: <access denied>
00:00 PNP0c02 Motherboard resources
state = active
mem 0xe0000000-0xefffffff
00:01 PNP0a08 (unknown)
state = active
io 0xcf8-0xcff
00:02 PNP0c02 Motherboard resources
state = active
mem 0xe0000000-0xefffffff
mem 0xfed14000-0xfed17fff
mem 0xfed18000-0xfed18fff
mem 0xfed19000-0xfed19fff
mem 0xfed1c000-0xfed1ffff
mem 0xfed20000-0xfed3ffff
mem 0xfed40000-0xfed44fff
mem 0xfed45000-0xfed8ffff
00:03 PNP0200 AT DMA controller
state = active
io 0x0-0x1f
io 0x81-0x91
io 0x93-0x9f
io 0xc0-0xdf
dma 4
00:04 PNP0103 High-Precision Event Timer
state = active
mem 0xfed00000-0xfed003ff
00:05 PNP0c04 Math coprocessor
state = active
io 0xf0-0xf0
irq 13
00:06 PNP0c02 Motherboard resources
state = active
io 0x2e-0x2f
io 0x61-0x61
io 0x63-0x63
io 0x65-0x65
io 0x67-0x67
io 0x70-0x70
io 0x80-0x80
io 0x92-0x92
io 0xb2-0xb3
io 0x380-0x383
io 0x680-0x69f
io 0x800-0x80f
io 0x1000-0x107f
io 0x1180-0x11bf
io 0x1640-0x164f
00:07 PNP0c02 Motherboard resources
state = active
io 0x6a0-0x6af
io 0x6b0-0x6ff
00:08 PNP0b00 AT real-time clock
state = active
io 0x70-0x77
irq 8
00:09 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support)
state = active
io 0x60-0x60
io 0x64-0x64
irq 1
00:0a SYN012b (unknown)
state = active
irq 12
Mixers:
0: Conexant CX20549 (Venice)
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 43
Mono:
Front Left: Playback 0 [0%] [-64.50dB] [off]
Front Right: Playback 0 [0%] [-64.50dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 20
Mono:
Front Left: Playback 127 [635%] [160.50dB] [on]
Front Right: Playback 127 [635%] [160.50dB] [on]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Ext Mic',0
Capabilities: pvolume cvolume pswitch cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 20 Capture 0 - 23
Front Left: Playback 0 [0%] [-30.00dB] [off] Capture 0 [0%] [0.00dB] [on]
Front Right: Playback 0 [0%] [-30.00dB] [off] Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'ExtMic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Int Mic',0
Capabilities: pvolume cvolume pswitch cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 20 Capture 0 - 23
Front Left: Playback 0 [0%] [-30.00dB] [off] Capture 0 [0%] [0.00dB] [on]
Front Right: Playback 0 [0%] [-30.00dB] [off] Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'IntMic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Names of available sound cards:
Intel
cat: /etc/asound.conf: No such file or directory
cat: /home/ron/.asoundrc*: No such file or directory
[ 24.585056] Early unpacking initramfs... done
[ 24.891036] ACPI: Core revision 20070126
[ 24.891102] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 24.918150] CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c
[ 24.918166] SMP alternatives: switching to SMP code
[ 24.918821] Booting processor 1/1 eip 3000
[ 24.929032] Initializing CPU#1
[ 25.006950] Calibrating delay using timer specific routine.. 3991.25
BogoMIPS (lpj=7982503)
[ 25.006957] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000 00000000
[ 25.006962] monitor/mwait feature present.
[ 25.006967] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 25.006968] CPU: L2 cache: 2048K
[ 25.006970] CPU: Physical Processor ID: 0
[ 25.006972] CPU: Processor Core ID: 1
[ 25.006973] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000 00000000
[ 25.007466] CPU1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 0c
[ 25.007487] Total of 2 processors activated (7987.00 BogoMIPS).
[ 25.007685] ENABLING IO-APIC IRQs
[ 25.007878] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.155030] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 25.175044] Brought up 2 CPUs
[ 25.175070] CPU0 attaching sched-domain:
[ 25.175073] domain 0: span 03
[ 25.175074] groups: 01 02
[ 25.175077] CPU1 attaching sched-domain:
[ 25.175079] domain 0: span 03
[ 25.175080] groups: 02 01
[ 25.175322] net_namespace: 64 bytes
[ 25.175332] Booting paravirtualized kernel on bare hardware
[ 25.175750] Time: 2:38:33 Date: 07/16/08
[ 25.175779] NET: Registered protocol family 16
[ 25.175978] EISA bus registered
[ 25.175982] ACPI: bus type pci registered
[ 25.176197] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=5
[ 25.176199] PCI: Using configuration type 1
[ 25.176213] Setting up standard PCI resources
[ 25.178559] ACPI: EC: Look up EC in DSDT
[ 25.180671] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 25.181080] ACPI: Interpreter enabled
[ 25.181083] ACPI: (supports S0 S3 S4 S5)
[ 25.181096] ACPI: Using IOAPIC for interrupt routing
[ 25.182440] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 25.186450] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 25.186452] ACPI: EC: driver started in interrupt mode
[ 25.186497] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.187297] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 25.187302] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 25.188506] PCI: Transparent bridge - 0000:00:1e.0
[ 25.188543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.188820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 25.188930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 25.189048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 25.194585] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 25.194692] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 25.194797] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 25.194902] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 25.195010] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 25.195115] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 25.195221] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 25.195325] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 25.195455] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.195486] pnp: PnP ACPI init
[ 25.195492] ACPI: bus type pnp registered
[ 25.197578] pnp: PnP ACPI: found 11 devices
[ 25.197580] ACPI: ACPI bus type pnp unregistered
[ 25.197583] PnPBIOS: Disabled by ACPI PNP
[ 25.197819] PCI: Using ACPI for IRQ routing
[ 25.197821] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 25.235045] NET: Registered protocol family 8
[ 25.235047] NET: Registered protocol family 20
[ 25.235080] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 25.235084] hpet0: 3 64-bit timers, 14318180 Hz
[ 25.236119] AppArmor: AppArmor Filesystem Enabled
[ 25.238897] Time: tsc clocksource has been installed.
[ 25.238912] Switched to high resolution mode on CPU 0
[ 25.239022] Switched to high resolution mode on CPU 1
[ 25.251892] system 00:00: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 25.251898] system 00:02: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 25.251901] system 00:02: iomem range 0xfed14000-0xfed17fff could not be
reserved
[ 25.251904] system 00:02: iomem range 0xfed18000-0xfed18fff could not be
reserved
[ 25.251907] system 00:02: iomem range 0xfed19000-0xfed19fff could not be
reserved
[ 25.251909] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be
reserved
[ 25.251912] system 00:02: iomem range 0xfed20000-0xfed3ffff could not be
reserved
[ 25.251915] system 00:02: iomem range 0xfed40000-0xfed44fff could not be
reserved
[ 25.251918] system 00:02: iomem range 0xfed45000-0xfed8ffff could not be
reserved
[ 25.251924] system 00:04: iomem range 0xfed00000-0xfed003ff could not be
reserved
[ 25.251929] system 00:06: ioport range 0x380-0x383 has been reserved
[ 25.251932] system 00:06: ioport range 0x680-0x69f has been reserved
[ 25.251934] system 00:06: ioport range 0x800-0x80f has been reserved
[ 25.251937] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 25.251939] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 25.251942] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 25.251947] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 25.251949] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 25.282354] PCI: Bridge: 0000:00:1c.0
[ 25.282358] IO window: 2000-2fff
[ 25.282365] MEM window: d6000000-d7ffffff
[ 25.282370] PREFETCH window: d2000000-d3ffffff
[ 25.282376] PCI: Bridge: 0000:00:1c.1
[ 25.282378] IO window: 3000-3fff
[ 25.282384] MEM window: d4000000-d5ffffff
[ 25.282389] PREFETCH window: d0000000-d1ffffff
[ 25.282395] PCI: Bridge: 0000:00:1e.0
[ 25.282398] IO window: 4000-4fff
[ 25.282404] MEM window: d8000000-d80fffff
[ 25.282409] PREFETCH window: disabled.
[ 25.282441] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) ->
IRQ 16
[ 25.282448] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.282471] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) ->
IRQ 17
[ 25.282477] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.282487] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 25.282494] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 25.282504] NET: Registered protocol family 2
[ 25.319899] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 25.320098] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 25.320749] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 25.321076] TCP: Hash tables configured (established 131072 bind 65536)
[ 25.321078] TCP reno registered
[ 25.331985] checking if image is initramfs... it is
[ 25.937685] Freeing initrd memory: 7323k freed
[ 25.937858] Simple Boot Flag at 0x35 set to 0x1
[ 25.938528] audit: initializing netlink socket (disabled)
[ 25.938542] audit(1216175913.304:1): initialized
[ 25.938748] highmem bounce pool size: 64 pages
[ 25.940654] VFS: Disk quotas dquot_6.5.1
[ 25.940723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.940849] io scheduler noop registered
[ 25.940853] io scheduler anticipatory registered
[ 25.940855] io scheduler deadline registered
[ 25.940864] io scheduler cfq registered (default)
[ 25.940875] Boot video device is 0000:00:02.0
[ 25.940974] PCI: Firmware left 0000:05:08.0 e100 interrupts enabled,
disabling
[ 25.941087] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.941145] assign_interrupt_mode Found MSI capability
[ 25.941193] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.941229] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.941328] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 25.941384] assign_interrupt_mode Found MSI capability
[ 25.941429] Allocate Port Service[0000:00:1c.1:pcie00]
[ 25.941462] Allocate Port Service[0000:00:1c.1:pcie02]
[ 25.941721] isapnp: Scanning for PnP cards...
[ 26.296292] isapnp: No Plug & Play device found
[ 26.321896] Real Time Clock Driver v1.12ac
[ 26.322122] hpet_resources: 0xfed00000 is busy
[ 26.322151] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 26.323299] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 26.323366] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 26.323459] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 26.341190] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.341195] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.359658] mice: PS/2 mouse device common for all mice
[ 26.359768] EISA: Probing bus 0 at eisa.0
[ 26.359776] Cannot allocate resource for EISA slot 1
[ 26.359778] Cannot allocate resource for EISA slot 2
[ 26.359780] Cannot allocate resource for EISA slot 3
[ 26.359782] Cannot allocate resource for EISA slot 4
[ 26.359800] EISA: Detected 0 cards.
[ 26.359804] cpuidle: using governor ladder
[ 26.359805] cpuidle: using governor menu
[ 26.359887] NET: Registered protocol family 1
[ 26.359912] Using IPI No-Shortcut mode
[ 26.359943] registered taskstats version 1
[ 26.360049] Magic number: 0:996:611
[ 26.360080] hash matches device ptye1
[ 26.360137] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.360139] EDD information not available.
[ 26.360342] Freeing unused kernel memory: 368k freed
[ 26.372437] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 27.561294] fuse init (API version 7.9)
[ 27.578171] ACPI: SSDT 3F67C09B, 027A (r1 HP 30BB 3000 INTL
20050624)
[ 27.578376] ACPI: SSDT 3F67BB54, 04C2 (r1 HP 30BB 3001 INTL
20050624)
[ 27.580308] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 27.580313] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 27.580527] ACPI: SSDT 3F67C315, 00C8 (r1 HP 30BB 3000 INTL
20050624)
[ 27.580706] ACPI: SSDT 3F67C016, 0085 (r1 HP 30BB 3000 INTL
20050624)
[ 27.581551] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 27.581556] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.585785] ACPI: Thermal Zone [THR1] (52 C)
[ 27.986331] usbcore: registered new interface driver usbfs
[ 27.986355] usbcore: registered new interface driver hub
[ 27.986406] usbcore: registered new device driver usb
[ 27.987746] USB Universal Host Controller Interface driver v3.0
[ 27.987800] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 18
[ 27.987811] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.987816] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.988063] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 27.988096] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[ 27.988219] usb usb1: configuration #1 chosen from 1 choice
[ 27.988241] hub 1-0:1.0: USB hub found
[ 27.988245] hub 1-0:1.0: 2 ports detected
[ 28.009031] SCSI subsystem initialized
[ 28.037632] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 28.037635] e100: Copyright(c) 1999-2006 Intel Corporation
[ 28.037881] libata version 3.00 loaded.
[ 28.090232] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 28.090244] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 28.090249] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 28.090271] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 28.090304] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 28.090416] usb usb2: configuration #1 chosen from 1 choice
[ 28.090437] hub 2-0:1.0: USB hub found
[ 28.090442] hub 2-0:1.0: 2 ports detected
[ 28.194206] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 20
[ 28.194219] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 28.194223] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 28.194245] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 28.194276] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[ 28.194381] usb usb3: configuration #1 chosen from 1 choice
[ 28.194402] hub 3-0:1.0: USB hub found
[ 28.194407] hub 3-0:1.0: 2 ports detected
[ 28.298188] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 17
[ 28.298200] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 28.298204] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 28.298228] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 28.298260] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 28.298371] usb usb4: configuration #1 chosen from 1 choice
[ 28.298392] hub 4-0:1.0: USB hub found
[ 28.298397] hub 4-0:1.0: 2 ports detected
[ 28.402376] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 16 (level, low) ->
IRQ 17
[ 28.402385] PCI: Setting latency timer of device 0000:05:05.0 to 64
[ 28.455145] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[d8001000-d80017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.459451] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) ->
IRQ 21
[ 28.459516] PCI: Setting latency timer of device 0000:05:08.0 to 64
[ 28.459752] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 18
[ 28.459765] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.459769] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.459798] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 28.463720] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.463729] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 28.463735] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd8444000
[ 28.479044] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 28.479146] usb usb5: configuration #1 chosen from 1 choice
[ 28.479169] hub 5-0:1.0: USB hub found
[ 28.479174] hub 5-0:1.0: 8 ports detected
[ 28.488556] e100: eth0: e100_probe: addr 0xd8000000, irq 21, MAC addr
00:1b:24:48:1a:0f
[ 28.583281] ahci 0000:00:1f.2: version 3.0
[ 28.583305] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 28.583355] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5)
don't match, using nr_ports
[ 28.583358] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 28.630014] Clocksource tsc unstable (delta = -356191524 ns)
[ 28.634447] Time: hpet clocksource has been installed.
[ 28.686531] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 28.827769] usb 5-4: configuration #1 chosen from 1 choice
[ 29.045375] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf
impl SATA mode
[ 29.045385] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 29.045395] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 29.045779] scsi0 : ahci
[ 29.045986] scsi1 : ahci
[ 29.046116] scsi2 : ahci
[ 29.046268] scsi3 : ahci
[ 29.046346] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xd8444500
irq 221
[ 29.046350] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xd8444580
irq 221
[ 29.046353] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xd8444600
irq 221
[ 29.046356] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xd8444680
irq 221
[ 29.070289] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00547c2200]
[ 29.121715] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.122258] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
[ 29.122266] ata1.00: 312581808 sectors, multi 16: LBA48
[ 29.122916] ata1.00: configured for UDMA/100
[ 29.153406] ata2: SATA link down (SStatus 0 SControl 0)
[ 29.187062] ata3: SATA link down (SStatus 0 SControl 300)
[ 29.218017] ata4: SATA link down (SStatus 0 SControl 0)
[ 29.218297] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03
PQ: 0 ANSI: 5
[ 29.218641] ata_piix 0000:00:1f.1: version 2.12
[ 29.218659] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 20
[ 29.218695] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 29.218750] scsi4 : ata_piix
[ 29.218880] scsi5 : ata_piix
[ 29.219293] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 29.219296] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 29.226185] Driver 'sd' needs updating - please use bus_type methods
[ 29.228972] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 29.228999] sd 0:0:0:0: [sda] Write Protect is off
[ 29.229005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.229042] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 29.229146] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 29.229169] sd 0:0:0:0: [sda] Write Protect is off
[ 29.229174] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.229210] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 29.229218] sda: sda1 sda2 < sda5 >
[ 29.319126] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.323796] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.524118] ata5.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2
[ 29.529391] Attempting manual resume
[ 29.529394] swsusp: Resume From Partition 8:5
[ 29.529395] PM: Checking swsusp image.
[ 29.529592] PM: Resume from disk failed.
[ 29.573549] kjournald starting. Commit interval 5 seconds
[ 29.573591] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.696024] ata5.00: configured for MWDMA2
[ 29.696111] ata6: port disabled. ignoring.
[ 29.697999] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50
PQ: 0 ANSI: 5
[ 29.698097] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 38.184781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.304156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.428649] Linux agpgart interface v0.102
[ 38.476718] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 38.516609] intel_rng: FWH not detected
[ 38.612713] input: Power Button (FF) as /devices/virtual/input/input3
[ 38.671572] ACPI: Power Button (FF) [PWRF]
[ 38.671649] input: Power Button (CM) as /devices/virtual/input/input4
[ 38.719539] ACPI: Power Button (CM) [PWRB]
[ 38.719598] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 38.751527] ACPI: Sleep Button (CM) [SLPB]
[ 38.751584] input: Lid Switch as /devices/virtual/input/input6
[ 38.776618] agpgart: Detected an Intel 945GM Chipset.
[ 38.777561] agpgart: Detected 7932K stolen memory.
[ 38.783822] ACPI: Lid Switch [LID]
[ 38.794071] agpgart: AGP aperture is 256M @ 0xc0000000
[ 38.948613] ACPI: WMI-Acer: Mapper loaded
[ 39.057053] ACPI: Battery Slot [BAT0] (battery present)
[ 39.072977] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 39.072981] ricoh-mmc: Copyright(c) Philip Langdale
[ 39.073024] ricoh-mmc: Ricoh MMC controller found at 0000:05:05.2
[1180:0843] (rev 1)
[ 39.073036] ricoh-mmc: Controller is now disabled.
[ 39.101658] ACPI: AC Adapter [ACAD] (on-line)
[ 39.125066] iTCO_vendor_support: vendor-support=0
[ 39.152431] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.152531] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 39.152569] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.212413] sdhci: Secure Digital Host Controller Interface driver
[ 39.212417] sdhci: Copyright(c) Pierre Ossman
[ 39.212467] sdhci: SDHCI controller found at 0000:05:05.1 [1180:0822] (rev
19)
[ 39.212485] PCI: Enabling device 0000:05:05.1 (0000 -> 0002)
[ 39.212492] ACPI: PCI Interrupt 0000:05:05.1[B] -> GSI 17 (level, low) ->
IRQ 16
[ 39.212514] sdhci:slot0: Will use DMA mode even though HW doesn't fully
claim to support it.
[ 39.212522] PCI: Setting latency timer of device 0000:05:05.1 to 64
[ 39.212576] mmc0: SDHCI at 0xd8001800 irq 16 DMA
[ 39.351948] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[ 39.412357] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 39.415175] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 39.476319] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 39.684951] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection
driver for Linux, 1.2.0
[ 39.684956] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 39.685071] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 17
[ 39.685086] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 39.685113] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 39.791232] Driver 'sr' needs updating - please use bus_type methods
[ 39.797801] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 39.797806] Uniform CD-ROM driver Revision: 3.20
[ 39.797856] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 39.807835] Linux video capture interface: v2.00
[ 39.848877] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 39.850246] usbcore: registered new interface driver uvcvideo
[ 39.850249] USB Video Class driver (v0.1.0)
[ 39.941206] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 39.941231] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.073677] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 40.138136] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input9
[ 40.526894] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 40.528342] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 40.665637] udev: renamed network interface wlan0 to eth1
[ 40.704807] lp: driver loaded but no devices found
[ 40.803906] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47
[ 40.803951] usbcore: registered new interface driver sn9c102
[ 40.870497] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1
across:3004112k
[ 41.410828] EXT3 FS on sda1, internal journal
[ 42.630591] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 43.088102] No dock devices found.
[ 44.407982] ppdev: user-space parallel port driver
[ 44.568368] audit(1216175934.032:2): type=1503 operation="inode_permission"
requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5231
profile="/usr/sbin/cupsd" namespace="default"
[ 44.612433] apm: BIOS not found.
[ 48.698612] Bluetooth: Core ver 2.11
[ 48.699083] NET: Registered protocol family 31
[ 48.699091] Bluetooth: HCI device and connection manager initialized
[ 48.699098] Bluetooth: HCI socket layer initialized
[ 48.761567] Bluetooth: L2CAP ver 2.9
[ 48.761572] Bluetooth: L2CAP socket layer initialized
[ 48.846140] Bluetooth: RFCOMM socket layer initialized
[ 48.846159] Bluetooth: RFCOMM TTY layer initialized
[ 48.846163] Bluetooth: RFCOMM ver 1.8
[ 52.484879] [drm] Initialized drm 1.1.0 20060810
[ 52.487081] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 17
[ 52.487090] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 52.487153] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 69.594843] NET: Registered protocol family 10
[ 69.595728] lo: Disabled Privacy Extensions
[ 69.596891] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.598195] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 80.122768] CPU0 attaching NULL sched-domain.
[ 80.122775] CPU1 attaching NULL sched-domain.
[ 80.131718] CPU0 attaching sched-domain:
[ 80.131727] domain 0: span 03
[ 80.131731] groups: 01 02
[ 80.131738] CPU1 attaching sched-domain:
[ 80.131742] domain 0: span 03
[ 80.131746] groups: 02 01
[ 81.179685] NET: Registered protocol family 17
[ 83.044030] eth1: Initial auth_alg=0
[ 83.044037] eth1: authenticate with AP 00:1e:e5:7a:94:2d
[ 83.046222] eth1: Initial auth_alg=0
[ 83.046225] eth1: authenticate with AP 00:1e:e5:7a:94:2d
[ 83.048325] eth1: RX authentication from 00:1e:e5:7a:94:2d (alg=0
transaction=2 status=0)
[ 83.048329] eth1: authenticated
[ 83.048332] eth1: associate with AP 00:1e:e5:7a:94:2d
[ 83.050042] eth1: authentication frame received from 00:1e:e5:7a:94:2d, but
not in authenticate state - ignored
[ 83.058976] eth1: authentication frame received from 00:1e:e5:7a:94:2d, but
not in authenticate state - ignored
[ 83.061785] eth1: authentication frame received from 00:1e:e5:7a:94:2d, but
not in authenticate state - ignored
[ 83.066866] eth1: authentication frame received from 00:1e:e5:7a:94:2d, but
not in authenticate state - ignored
[ 83.069207] eth1: RX AssocResp from 00:1e:e5:7a:94:2d (capab=0x1 status=0
aid=12)
[ 83.069211] eth1: associated
[ 83.070889] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 83.072681] eth1: association frame received from 00:1e:e5:7a:94:2d, but not
in associate state - ignored
[ 83.077174] eth1: association frame received from 00:1e:e5:7a:94:2d, but not
in associate state - ignored
[ 83.078481] eth1: association frame received from 00:1e:e5:7a:94:2d, but not
in associate state - ignored
[ 86.191441] UDF-fs: Partition marked readonly; forcing readonly mount
[ 88.339795] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'DVD_01_1',
timestamp 2007/07/28 14:22 (1f4c)
[ 101.880960] eth1: no IPv6 routers present
[ 394.478908] eth1: RX too short data frame payload
[ 396.616061] eth1: RX too short data frame payload
[ 637.809997] eth1: RX too short data frame payload
[ 817.788613] eth1: RX too short data frame payload
[ 925.785856] eth1: RX too short data frame payload
[ 1143.126543] eth1: RX too short data frame payload
[ 1360.775772] eth1: RX too short data frame payload
[ 1362.723480] eth1: RX too short data frame payload
CPU0 CPU1
0: 704782 8 IO-APIC-edge timer
1: 1963 0 IO-APIC-edge i8042
8: 29 0 IO-APIC-edge rtc
9: 9320 23 IO-APIC-fasteoi acpi
12: 463406 7 IO-APIC-edge i8042
14: 4668 0 IO-APIC-edge libata
15: 0 0 IO-APIC-edge libata
16: 0 0 IO-APIC-fasteoi sdhci:slot0
17: 273977 2 IO-APIC-fasteoi uhci_hcd:usb4, ohci1394, [EMAIL
PROTECTED]:0000:00:02.0
18: 26 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
21: 767 0 IO-APIC-fasteoi eth0
22: 1743 0 IO-APIC-fasteoi HDA Intel
220: 39275 0 PCI-MSI-edge iwl3945
221: 19385 0 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 83824 403094 Local timer interrupts
RES: 686707 767623 Rescheduling interrupts
CAL: 127 325 function call interrupts
TLB: 1542 1927 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
** Attachment added: "uname-a.log"
http://launchpadlibrarian.net/16052459/uname-a.log
--
realtek audio ac'97 drivers makes sounds come out garbled
https://bugs.launchpad.net/bugs/248881
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
