Bonjour, je viens de changer de scanner et ... j'ai des soucis :-) J'ai achetà un epson 2480 car il est annoncà comme totalement supportà partout (il y a mÃme une faq d'installation à cette adresse : http://ubuntuforums.org/archive/index.php/t-26911.html ) mais lorsque je le connecte j'ai droit à un
[EMAIL PROTECTED]:~$ sudo tail -f /var/log/syslog May 13 12:28:38 Aqua kernel: usb 6-1: new high speed USB device using ehci_hcd and address 2 May 13 12:28:39 Aqua kernel: usb 6-1: khubd timed out on ep0in May 13 12:28:39 Aqua kernel: usb 6-1: device descriptor read/64, error -110 May 13 12:28:44 Aqua kernel: usb 6-1: khubd timed out on ep0in May 13 12:28:44 Aqua kernel: usb 6-1: device descriptor read/64, error -110 May 13 12:28:44 Aqua kernel: usb 6-1: new high speed USB device using ehci_hcd and address 3 May 13 12:28:45 Aqua kernel: usb 6-1: khubd timed out on ep0in May 13 12:28:45 Aqua kernel: usb 6-1: device descriptor read/64, error -110 May 13 12:28:50 Aqua kernel: usb 6-1: khubd timed out on ep0in May 13 12:28:51 Aqua kernel: usb 6-1: device descriptor read/64, error -110 J'ai alors cherchà sur le net la signification de Âdevice descriptor read/64, error -110Â. On trouve surtout une erreur -71 qui serait en relation avec une nouvelle faÃon de gÃrer l'USB à partir du noyau 2.6.10 (pas de chance : [EMAIL PROTECTED]:~$ uname -r 2.6.10-5-k7 ) mais tous les correctifs proposÃs (en particulier echo Y > /sys/module/usbcore/parameters/old_scheme_first ) n'y changent rien. Une idÃe ? PS : le pb est que je ne sais mÃme pas si le scanner fonctionne, je n'ai que des machines sous linux PS : j'ai essayà sur des prises USB1 natives et USB2 obtenues grÃce à une carte PCI->USB qui fonctionne à priori bien avec mon disque dur portable et mon disque dur USB : 12:44:38 Aqua kernel: usb 6-4: new high speed USB device using ehci_hcd and address 5 May 13 12:44:39 Aqua kernel: scsi1 : SCSI emulation for USB Mass Storage devices May 13 12:44:39 Aqua kernel: usb-storage: device found at 5 May 13 12:44:39 Aqua kernel: usb-storage: waiting for device to settle before scanning May 13 12:44:39 Aqua usb.agent[8521]: usb-storage: already loaded May 13 12:44:44 Aqua kernel: Vendor: WDC Model: WD800BB-00JHA0 Rev: 05.0 May 13 12:44:44 Aqua kernel: Type: Direct-Access ANSI SCSI revision: 02 May 13 12:44:44 Aqua kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) May 13 12:44:44 Aqua kernel: sdb: assuming drive cache: write through May 13 12:44:44 Aqua kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) May 13 12:44:44 Aqua kernel: sdb: assuming drive cache: write through May 13 12:44:44 Aqua kernel: /dev/scsi/host1/bus0/target0/lun0: p1 May 13 12:44:44 Aqua kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 May 13 12:44:44 Aqua kernel: usb-storage: device scan complete May 13 12:44:44 Aqua scsi.agent[8570]: sd_mod: loaded sucessfully May 13 12:44:44 Aqua udev[8580]: configured rule in '/etc/udev/rules.d/udev.rules' at line 27 applied, 'sdb' becomes '%k' May 13 12:44:44 Aqua udev[8580]: creating device node '/dev/sdb' May 13 12:44:44 Aqua udev[8637]: configured rule in '/etc/udev/rules.d/udev.rules' at line 27 applied, 'sdb1' becomes '%k' May 13 12:44:44 Aqua udev[8637]: creating device node '/dev/sdb1' May 13 12:44:44 Aqua kernel: kjournald starting. Commit interval 5 seconds May 13 12:44:44 Aqua kernel: EXT3 FS on sdb1, internal journal May 13 12:44:44 Aqua kernel: EXT3-fs: mounted filesystem with ordered data mode. Merci Bye -- Latreyte David
-- ubuntu-fr mailing list ubuntu-fr@lists.ubuntu.com http://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
