καλησπερα το ιδιο προβλημα με την καρτα τηλεορασης εχω και εγω αλυτο
βλεποντας το τελευταιο μηνυμα σας στελνω τα αποτελεσματα του τερματικου
για να δητε μηπως και γινετε κατι
sendmail: fatal: open /etc/postfix/main.cf: No such file or directory
[sudo] password for sakis:
root@:~# lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory
Controller Hub (rev 0e)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 05)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 05)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 05)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 05)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT]
(rev a2)
01:02.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01)
01:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11)
01:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11)
01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
root@:~# dmesg
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12
02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] Command line: root=UUID=1a2dc565-6b27-40c1-ba29-4ca686796842 ro
quiet splash locale=el_GR
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F81B0 checksum 0
[ 0.000000] ACPI: RSDP 000F81B0, 0014 (r0 FOXCON)
[ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 FOXCON AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 FOXCON AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 3FEF3180, 435B (r1 FOXCON AWRDACPI 1000 MSFT
100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: MCFG 3FEF7640, 003C (r1 FOXCON AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: APIC 3FEF7540, 0084 (r1 FOXCON AWRDACPI 42302E31 AWRD
0)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fef0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261872) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fef0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261872
[ 0.000000] On node 0 totalpages: 261775
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1126 pages reserved
[ 0.000000] DMA zone: 2817 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254252 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3ff00000:a0100000)
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257069
[ 0.000000] Kernel command line:
root=UUID=1a2dc565-6b27-40c1-ba29-4ca686796842 ro quiet splash locale=el_GR
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 32.955074] time.c: Detected 3200.464 MHz processor.
[ 32.959550] Console: colour VGA+ 80x25
[ 32.959567] Checking aperture...
[ 32.959577] Calgary: detecting Calgary via BIOS EBDA area
[ 32.959579] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 32.970388] Memory: 1020348k/1047488k available (2274k kernel code, 26752k
reserved, 1185k data, 296k init)
[ 32.970436] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4,
Nodes=1
[ 33.048797] Calibrating delay using timer specific routine.. 6406.49
BogoMIPS (lpj=12812996)
[ 33.048830] Security Framework v1.0.0 initialized
[ 33.048836] SELinux: Disabled at boot.
[ 33.048982] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 33.049685] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 33.050031] Mount-cache hash table entries: 256
[ 33.050204] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 33.050208] CPU: L2 cache: 256K
[ 33.050211] CPU 0/0 -> Node 0
[ 33.050213] using mwait in idle threads.
[ 33.050215] CPU: Hyper-Threading is disabled
[ 33.050225] CPU0: Thermal monitoring enabled (TM1)
[ 33.050239] SMP alternatives: switching to UP code
[ 33.050536] Early unpacking initramfs... done
[ 33.365532] ACPI: Core revision 20070126
[ 33.365588] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 33.409753] Using local APIC timer interrupts.
[ 33.440911] result 8334518
[ 33.440913] Detected 8.334 MHz APIC timer.
[ 33.443676] Brought up 1 CPUs
[ 33.443922] NET: Registered protocol family 16
[ 33.444053] ACPI: bus type pci registered
[ 33.444061] PCI: Using configuration type 1
[ 33.445339] ACPI: EC: Look up EC in DSDT
[ 33.449424] ACPI: Interpreter enabled
[ 33.449430] ACPI: (supports S0 S1 S4 S5)
[ 33.449451] ACPI: Using IOAPIC for interrupt routing
[ 33.457910] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 33.457916] PCI: Probing PCI hardware (bus 00)
[ 33.458414] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 33.458419] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 33.458980] PCI: Transparent bridge - 0000:00:1e.0
[ 33.459023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 33.459193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 33.467067] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 33.467182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 33.467290] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 33.467397] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 33.467504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 33.467668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 33.467778] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 33.467885] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 33.468035] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 33.468057] pnp: PnP ACPI init
[ 33.468071] ACPI: bus type pnp registered
[ 33.472341] pnp: PnP ACPI: found 16 devices
[ 33.472345] ACPI: ACPI bus type pnp unregistered
[ 33.472418] PCI: Using ACPI for IRQ routing
[ 33.472422] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 33.472523] NET: Registered protocol family 8
[ 33.472525] NET: Registered protocol family 20
[ 33.472544] PCI-GART: No AMD northbridge found.
[ 33.472654] pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
[ 33.472664] pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 33.472671] pnp: 00:0f: iomem range 0xd0000-0xd3fff has been reserved
[ 33.472674] pnp: 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
[ 33.472677] pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
[ 33.472679] pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[ 33.473153] PCI: Bridge: 0000:00:1e.0
[ 33.473158] IO window: d000-dfff
[ 33.473164] MEM window: fa000000-fcffffff
[ 33.473168] PREFETCH window: b0000000-cfffffff
[ 33.473183] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 33.473205] NET: Registered protocol family 2
[ 33.475533] Time: tsc clocksource has been installed.
[ 33.511491] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 33.511897] TCP established hash table entries: 131072 (order: 9, 3145728
bytes)
[ 33.513909] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 33.514563] TCP: Hash tables configured (established 131072 bind 65536)
[ 33.514568] TCP reno registered
[ 33.523562] checking if image is initramfs... it is
[ 34.128179] Freeing initrd memory: 7683k freed
[ 34.134049] audit: initializing netlink socket (disabled)
[ 34.134066] audit(1211497341.156:1): initialized
[ 34.137184] VFS: Disk quotas dquot_6.5.1
[ 34.137285] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 34.137438] io scheduler noop registered
[ 34.137441] io scheduler anticipatory registered
[ 34.137443] io scheduler deadline registered
[ 34.137660] io scheduler cfq registered (default)
[ 34.137957] Boot video device is 0000:01:00.0
[ 34.215728] Real Time Clock Driver v1.12ac
[ 34.215853] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.215857] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 34.215962] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.216298] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.217525] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.218021] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.219203] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 34.219494] input: Macintosh mouse button emulation as /class/input/input0
[ 34.219621] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 34.223022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.223031] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 34.223339] mice: PS/2 mouse device common for all mice
[ 34.223491] TCP cubic registered
[ 34.223509] NET: Registered protocol family 1
[ 34.223777] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
[ 34.223788] Freeing unused kernel memory: 296k freed
[ 34.249306] input: AT Translated Set 2 keyboard as /class/input/input1
[ 35.486569] AppArmor: AppArmor initialized<5>audit(1211497342.512:2):
type=1505 info="AppArmor initialized" pid=1211
[ 35.522091] fuse init (API version 7.8)
[ 35.528107] Failure registering capabilities with primary security module.
[ 35.537802] ACPI: Fan [FAN] (on)
[ 35.542893] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 35.542908] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 35.542920] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 35.544193] ACPI: Thermal Zone [THRM] (30 C)
[ 36.339411] usbcore: registered new interface driver usbfs
[ 36.339442] usbcore: registered new interface driver hub
[ 36.339489] usbcore: registered new device driver usb
[ 36.340348] USB Universal Host Controller Interface driver v3.0
[ 36.340422] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 36.340435] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 36.340438] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 36.340632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 36.340667] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 36.340827] usb usb1: configuration #1 chosen from 1 choice
[ 36.340858] hub 1-0:1.0: USB hub found
[ 36.340865] hub 1-0:1.0: 2 ports detected
[ 36.446851] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 36.446865] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 36.446869] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 36.446907] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 36.446938] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 36.447066] usb usb2: configuration #1 chosen from 1 choice
[ 36.447098] hub 2-0:1.0: USB hub found
[ 36.447106] hub 2-0:1.0: 2 ports detected
[ 36.491640] SCSI subsystem initialized
[ 36.496145] libata version 2.21 loaded.
[ 36.533154] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 36.554525] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 36.554541] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 36.554545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 36.554578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 36.554607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 36.554731] usb usb3: configuration #1 chosen from 1 choice
[ 36.554761] hub 3-0:1.0: USB hub found
[ 36.554769] hub 3-0:1.0: 2 ports detected
[ 36.663060] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 16
[ 36.663075] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 36.663078] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 36.663120] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 36.663151] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 36.663270] usb usb4: configuration #1 chosen from 1 choice
[ 36.663303] hub 4-0:1.0: USB hub found
[ 36.663311] hub 4-0:1.0: 2 ports detected
[ 36.678015] FDC 0 is a post-1991 82077
[ 36.771080] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 23
[ 36.771182] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 36.771189] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 36.771250] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 36.771288] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 36.771296] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 36.775159] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 36.775270] usb usb5: configuration #1 chosen from 1 choice
[ 36.775306] hub 5-0:1.0: USB hub found
[ 36.775315] hub 5-0:1.0: 8 ports detected
[ 36.881890] ata_piix 0000:00:1f.1: version 2.11
[ 36.881911] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 36.881951] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 36.882066] scsi0 : ata_piix
[ 36.882147] scsi1 : ata_piix
[ 36.882275] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl
0x00000000000103f6 bmdma 0x000000000001f900 irq 14
[ 36.882280] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl
0x0000000000010376 bmdma 0x000000000001f908 irq 15
[ 37.224578] ata1.00: ATAPI: LITE-ON DVDRW SHM-165P6S, MS0P, max UDMA/66
[ 37.224586] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 37.416018] ata1.00: configured for UDMA/33
[ 37.586345] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SHM-165P6S MS0P
PQ: 0 ANSI: 5
[ 37.586971] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 37.586999] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 37.587035] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 37.587090] scsi2 : ata_piix
[ 37.587458] scsi3 : ata_piix
[ 37.587840] ata3: SATA max UDMA/133 cmd 0x000000000001f800 ctl
0x000000000001f702 bmdma 0x000000000001f400 irq 19
[ 37.587845] ata4: SATA max UDMA/133 cmd 0x000000000001f600 ctl
0x000000000001f502 bmdma 0x000000000001f408 irq 19
[ 37.759908] ata3.00: ATA-7: Maxtor 6V160E0, VA111630, max UDMA/133
[ 37.759913] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 37.783812] ata3.00: configured for UDMA/133
[ 37.955357] ata4.00: ATA-7: Maxtor 6V160E0, VA111630, max UDMA/133
[ 37.955362] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 37.979481] ata4.00: configured for UDMA/133
[ 37.979617] scsi 2:0:0:0: Direct-Access ATA Maxtor 6V160E0 VA11
PQ: 0 ANSI: 5
[ 37.980316] scsi 3:0:0:0: Direct-Access ATA Maxtor 6V160E0 VA11
PQ: 0 ANSI: 5
[ 37.985275] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[ 37.985280] 8139cp 0000:01:06.0: Try the "8139too" driver instead.
[ 37.988560] 8139too Fast Ethernet driver 0.9.28
[ 37.989098] ACPI: PCI Interrupt 0000:01:06.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 37.989896] eth0: RealTek RTL8139 at 0xffffc200005e2000, 00:01:6c:e0:e4:30,
IRQ 22
[ 37.989901] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 38.017923] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 38.017929] Uniform CD-ROM driver Revision: 3.20
[ 38.018006] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 38.022006] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 38.022030] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 38.022052] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 38.036764] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.036781] sd 2:0:0:0: [sda] Write Protect is off
[ 38.036784] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.036805] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 38.036879] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.036892] sd 2:0:0:0: [sda] Write Protect is off
[ 38.036895] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.036916] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 38.036924] sda: sda1 sda2 sda3 < sda5 >
[ 38.087928] sd 2:0:0:0: [sda] Attached SCSI disk
[ 38.088269] sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 38.088285] sd 3:0:0:0: [sdb] Write Protect is off
[ 38.088288] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.088308] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 38.088378] sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 38.088391] sd 3:0:0:0: [sdb] Write Protect is off
[ 38.088393] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.088414] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 38.088417] sdb: sdb1 < sdb5 sdb6 >
[ 38.140135] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 38.471339] Attempting manual resume
[ 38.471343] swsusp: Resume From Partition 8:5
[ 38.471344] PM: Checking swsusp image.
[ 38.471529] PM: Resume from disk failed.
[ 38.498092] kjournald starting. Commit interval 5 seconds
[ 38.498109] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.666094] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.695247] Netfilter messages via NETLINK v0.30.
[ 44.705089] nf_conntrack version 0.5.0 (4091 buckets, 32728 max)
[ 45.322053] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 46.721529] NET: Registered protocol family 17
[ 47.219540] intel_rng: FWH not detected
[ 47.462048] iTCO_vendor_support: vendor-support=0
[ 47.463201] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 47.463306] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2,
TCOBASE=0x0460)
[ 47.463371] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 47.526780] Linux video capture interface: v2.00
[ 47.645616] bttv: driver version 0.9.17 loaded
[ 47.645621] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 47.645710] bttv: Bt8xx card found (0).
[ 47.645735] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 19 (level, low) ->
IRQ 19
[ 47.645748] bttv0: Bt878 (rev 17) at 0000:01:04.0, irq: 19, latency: 32,
mmio: 0xcffff000
[ 47.645759] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 47.645791] bttv0: gpio: en=00000000, out=00000000 in=00dfc0ff [init]
[ 48.321571] input: PC Speaker as /class/input/input2
[ 48.421109] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
[ 48.421116] bttv0: using tuner=-1
[ 48.421119] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 48.522803] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 48.550224] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 48.580187] bttv0: i2c: checking for TDA9887 @ 0x86... found
[ 48.580488] bttv0: registered device video0
[ 48.580538] bttv0: registered device vbi0
[ 48.684457] bt878: AUDIO driver version 0.0.0 loaded
[ 48.684503] bt878: Bt878 AUDIO function found (0).
[ 48.684524] ACPI: PCI Interrupt 0000:01:04.1[A] -> GSI 19 (level, low) ->
IRQ 19
[ 48.684531] bt878_probe: card id=[0x0], Unknown card.
[ 48.684532] Exiting..
[ 48.684537] ACPI: PCI interrupt for device 0000:01:04.1 disabled
[ 48.684542] bt878: probe of 0000:01:04.1 failed with error -22
[ 48.772590] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) ->
IRQ 17
[ 48.772785] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 48.967928] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 48.971019] parport_pc 00:09: reported by Plug and Play ACPI
[ 48.971068] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 49.100763] intel8x0_measure_ac97_clock: measured 58790 usecs
[ 49.100767] intel8x0: clocking to 48000
[ 49.442940] lp0: using parport0 (interrupt-driven).
[ 49.659226] Adding 1494004k swap on /dev/sda5. Priority:-1 extents:1
across:1494004k
[ 49.960210] EXT3 FS on sda2, internal journal
[ 50.148396] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
[EMAIL PROTECTED]
[ 51.735676] NET: Registered protocol family 10
[ 51.735820] lo: Disabled Privacy Extensions
[ 53.626347] No dock devices found.
[ 53.826888] input: Power Button (FF) as /class/input/input4
[ 53.832159] ACPI: Power Button (FF) [PWRF]
[ 53.866795] input: Power Button (CM) as /class/input/input5
[ 53.872076] ACPI: Power Button (CM) [PWRB]
[ 58.011732] Failure registering capabilities with primary security module.
[ 58.339625] ppdev: user-space parallel port driver
[ 59.046855] audit(1211486566.770:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=5191
profile="/usr/sbin/cupsd"
[ 61.822654] eth0: no IPv6 routers present
[ 421.058790] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:18:f3:3e:8d:cd:08:00 SRC=192.168.2.4 DST=192.168.2.255
LEN=265 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=245
[ 421.058943] Inbound IN=eth0 OUT=
MAC=ff:ff:ff:ff:ff:ff:00:18:f3:3e:8d:cd:08:00 SRC=192.168.2.4 DST=192.168.2.255
LEN=242 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=138 DPT=138 LEN=222
root@:~# lsmod
Module Size Used by
binfmt_misc 14860 1
ppdev 11272 0
cpufreq_ondemand 10896 0
cpufreq_stats 8160 0
freq_table 6464 2 cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 6048 0
cpufreq_conservative 9608 0
cpufreq_powersave 3072 0
sbs 21520 0
button 10400 0
ac 7304 0
container 6400 0
video 21140 0
dock 12264 0
battery 12424 0
ipv6 317192 14
xt_limit 4608 8
xt_tcpudp 4864 7
aes_x86_64 26920 0
ipt_LOG 8192 8
ipt_MASQUERADE 5248 0
ipt_TOS 3584 0
ipt_REJECT 6400 1
nf_conntrack_irc 9504 0
nf_conntrack_ftp 12640 0
xt_state 3968 6
dm_crypt 16528 0
dm_mod 67440 1 dm_crypt
dvb_bt8xx 20228 0
dvb_core 94768 1 dvb_bt8xx
dvb_pll 18436 1 dvb_bt8xx
lp 15048 0
snd_intel8x0 40104 1
snd_ac97_codec 122200 1 snd_intel8x0
ac97_bus 4096 1 snd_ac97_codec
snd_pcm_oss 50048 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_pcm 94344 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
bt878 13672 1 dvb_bt8xx
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 1 snd_seq_midi
parport_pc 41896 1
parport 44172 3 ppdev,lp,parport_pc
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
serio_raw 9092 0
pcspkr 4608 0
psmouse 45596 0
snd_seq 62496 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27272 2 snd_pcm,snd_seq
snd_seq_device 10260 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
bttv 216692 2 dvb_bt8xx,bt878
video_buf 30084 1 bttv
ir_common 38916 1 bttv
compat_ioctl32 11136 1 bttv
i2c_algo_bit 8324 1 bttv
btcx_risc 6792 1 bttv
tveeprom 20496 1 bttv
i2c_core 30208 5 dvb_bt8xx,dvb_pll,bttv,i2c_algo_bit,tveeprom
videodev 31360 1 bttv
v4l2_common 21888 3 bttv,compat_ioctl32,videodev
v4l1_compat 15364 2 bttv,videodev
iTCO_wdt 13648 0
iTCO_vendor_support 5636 1 iTCO_wdt
snd 69288 12
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 10272 1 snd
snd_page_alloc 12560 2 snd_intel8x0,snd_pcm
intel_agp 30624 0
af_packet 28172 2
evdev 13056 3
iptable_nat 9732 0
nf_nat 23468 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 22288 8 iptable_nat
nf_conntrack 76508 7
ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 8264 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_mangle 4352 0
iptable_filter 4480 1
ip_tables 23464 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 23432 9
xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3 146576 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
sg 41384 0
sd_mod 32512 7
sr_mod 19876 0
cdrom 41768 1 sr_mod
8139too 31232 0
ata_generic 9988 0
floppy 69608 0
8139cp 28032 0
mii 7424 2 8139too,8139cp
ata_piix 20996 5
libata 138928 2 ata_generic,ata_piix
scsi_mod 172856 4 sg,sd_mod,sr_mod,libata
ehci_hcd 40076 0
uhci_hcd 29600 0
usbcore 161584 3 ehci_hcd,uhci_hcd
thermal 16528 1
processor 36232 1 thermal
fan 6920 1
fuse 52528 7
apparmor 47008 0
commoncap 9472 1 apparmor
root@:~#
root@:~# lspci --nn
lspci: invalid option -- -
Usage: lspci [<switches>]
-v Be verbose
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-b Bus-centric view (PCI addresses and IRQ's instead of those seen
by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected
slots
-d [<vendor>]:[<device>] Show only selected devices
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-F <file> Read configuration data from given file
-G Enable PCI access debugging
root@:~#
--
Ubuntu-gr mailing list
Ubuntu-gr@lists.ubuntu.com
If you do not want to receive any more messages from the ubuntu-gr mailing
list, please follow this link and choose unsubscribe:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-gr