I am still trying to recompile the psb driver against the ubuntu kernel. The psb driver installed by the packages does not seem to be correct.
However, your changes worked fine against the moblin kernel and psb driver. Inuka -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bryce Harrington Sent: Monday, January 14, 2008 6:56 PM To: [email protected] Subject: Re: Problems booting menlow box On Mon, Jan 14, 2008 at 01:27:57PM -0800, Bryce Harrington wrote: > I've not been able to build a new image to test -psb with > moblin-image-creator, however Mithrandir supplied me with > an img he built. > > However, after powercycling the test hardware this morning, it no longer > boots, and I cannot access BIOS. I'd had the machine up and running > this morning on the old UME image, and hadn't touched the hardware in > the meantime, so I'm not sure what's gone wrong. I finally just swapped out the C0 board, reverting back to the B0 board, and it's booting up again. Not sure why the C0 board quit working, but the B0 should be sufficient for testing -psb. > Can someone with a working menlow box please boot with a new image > including the new -psb and libdrm2, and verify that X comes up? Has anyone had luck with it? Bryce -- Ubuntu-mobile mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile -- Ubuntu-mobile mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile
