On Mon, Mar 17, 2008 at 07:13:45AM -0700, Ziad O'Hanlon wrote: > OK. So I made the test. It does not work with theses command manually. Same > command on another PC is ok. > > partition_cmds="parted /dev/dsk mklabel msdos;parted /dev/dsk mkpartfsprimary > fat32 0 4000;parted -- /dev/dsk mkpart extended 30720 -0;parted-- /dev/dsk > mkpartfs logical fat32 30720 -0;sleep 2;parted /dev/dsk set1 boot on;" > > You can see photos here : > http://sites.google.com/a/hurel.info/public/Unattended---Sata---Parted > (List of commands, then photo showing that on Optiplex 755 the Logical > Partition is not recognize as Fat32 (but Unknown), photo showing that > Logical Partition is recognize as fat32 on Optiplex GX280 ) I had the > same warning about deprecated SCSI ioctl on both. > > I absolutely don't know how to make it work on Optiplex 755. Could the > boot disk missing drivers ? SATA ? or anything ?
I install Optiplex 755 with a custom build based on the 4.7 release. Only diffrence is that I have updated the e1000 driver to the newest release, and a patch to reboot optiplex 745 via bios. Nils -- Nils Østbjerg SAMF-IT, Faculty of Social Sciences, Aalborg University, Denmark ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ unattended-info mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/unattended-info
