On Wed, Jun 12, 2013 at 10:07 PM, Timothy Balcer <timo...@telmate.com>wrote:
> At first, all I did was set 2 and 3 as consumers of 1, using the > configuration tool on 1. Nothing replicated. > > Then I set up cross replication on 2 and 3 , again only using the > configuration tool. Each set the other two as consumers, and I left the > everything as defaults except the replication dn. > > My test entries under dc=foo,dc=com then disappeared after restart. > > That's it. > take a look at these config files[1] , I have setup MMR between 3 servers [1] http://d.pr/f/8c1m > > What ldif search would you find most useful? > On Jun 11, 2013 8:41 PM, "Kiran Ayyagari" <kayyag...@apache.org> wrote: > > > On Wed, Jun 12, 2013 at 7:55 AM, Timothy Balcer <timo...@telmate.com> > > wrote: > > > > > Hi folks. I am familiar with OpenLDAP, Kerberos, SASL, GSSAPI.. all the > > fun > > > things you need for transparent SSO in a heterogenous organization :) > I'm > > > hitting a few walls here that I am guessing folks will be able to help > me > > > around..so here goes.. and please feel free to point me at RTFM! I have > > hit > > > the google hammer quite a bit on these and have found very little to > > help. > > > > > > First - Replication. > > > > > > Ok.. I have done syncrepl wih OpenLDAP etc, but the draw for me in > > ApacheDS > > > was Multi-master (supposedly available in M12!). I have a need to have > > > several geographically distant LDAP masters operating simultaneously, > and > > > this would be difficult otherwise. Problem: What am I missing? I setup > > > three ApacheDS servers running fine. I can connect to each. Lets call > > them > > > s1, s2 and s3. s1 is my local master, so first I setup Replication > there, > > > using the configuration manager, and pointed it at s2 and s3. I set the > > > replication base to be dc=foo, dc=com.. saved the config .. made the > > > dc=foo,dc=com partition on the slaves by hand, and then restarted all 3 > > > servers (s2 and s3 before s1). > > > > > > are all these replication connections bidirectional(i.e. making s1 a > > slave > > of s2 and s3, making s2 a slave of s1 and s3 etc.) ? > > if not they should be, if you have already configured can you show us the > > config.ldif files or the relevant parts of it (after stripping > > the confidential details) > > > > > Nada! > > > > > > I created an entry on s1 under dc=foo, dc=com and nothing happened. > After > > > some futzing around, I even managed to get the entry I created on s1 to > > > disappear from s1 (restarting the other servers and then restarting s1 > > > again) which.. to say the least.. is a bit vexing. > > > > > > So, do I need to setup some attributes on the other servers by hand? > > using > > > the standard LDIFs? I'm obviously missing something, but this is multi > > > master (I am told) and so I am guessing something is sort of working, > > since > > > the entry I created on s1 disappeared! Direction and hints as to > process > > > are very appreciated! > > > > > > it should just work with the default settings, so it would help us if > we > > know your configuration details. > > > > > -- > > > Timothy Balcer / IT Services > > > Telmate / San Francisco, CA > > > Direct / (415) 300-4313 > > > Customer Service / (800) 205-5510 > > > > > > > > > > > -- > > Kiran Ayyagari > > http://keydap.com > > > -- Kiran Ayyagari http://keydap.com