Hai,
I would like to test nat-pt for my network.
For simplicity I 've chosen the following setup
1) Host A - Ipv4 only ( 192.168.1.10)
2) Host B - Dual Stack ( eth0 - 192.168.1.1)
eth1 - fec0::1/48 )
3) Host C - IPV6 only ( fec0::2/48)
Host A is connected to eth0 of host B
HOst C is connected to eth1 of host B
verified that A & B and B & C are communicated.
I 've installed nat-pt source on host B. I 've given
the pool of addresses in IPv4_Addresses.list.
I 've set host b as default gw for A & B.
But I couldn't succeed the setup. I am not able to
ping
from hostA to eth1 of hostB(ipv6).It throws the error
as
" Socket: Address family not supported by protocol "
Like that when I ping from hostC to eth0 of hostB
(ipv4), I got network unreachable error.
My questions :
1)What may be the problem?
2) Since i 'm testing for only 3 systems, should I use
IPv6 DNS as the document says?.
3) What is the prefix I 've to give in nat-pt_global.h
file?
4) Any body had success with nat-pt implementaion on
linux? Please help me .
Sarav
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
