On Thu, 8 Sep 2005, Susan Zheng wrote:
Hi,
I'm a beginner for IPv6 need to set up a small private IPv6 network.
The lab setup plan is like below:
Use 1 windows 2003 server which has two IPv6 interfaces configured as
default routers(it has two NIC cards) connected to net1 and net2.
My linux host 1 is on net1 and linux host 2 is on net 2. Both are IPv6
enablled. The goal is to let the two hosts on different subnet to ping
each other by their site-scope address.
Note:
The two hosts can ping each other in IPv4 addresses, but can't reach each
other by IPv6 addresses.
Any advices about what need to do are very much appreciated!
Do you want to use autoconfiguration then enable router advertisment
windows. See this article
http://www.microsoft.com/technet/community/columns/cableguy/cg0902.mspx
If you prefer static configuration then linux configuration depends on
your linux distribution....
I hope this help.
Janos Mohacsi
Network Engineer, Research Associate
NIIF/HUNGARNET, HUNGARY
Key 00F9AF98: 8645 1312 D249 471B DBAE 21A2 9F52 0D1F 00F9 AF98
Susan
---------------------------------
Click here to donate to the Hurricane Katrina relief effort.
---------------------------------------------------------------------
The IPv6 Users Mailing List
Unsubscribe by sending "unsubscribe users" to [EMAIL PROTECTED]
