Bruno Rodrigues wrote: >On Fri, 2002-05-31 at 11:00, Lukas wrote: > > >>Hello group, >> >>I have serious problem with setting my siemens m20 as smsc center. Kannel >>cannot run it. I don`t know what it is, but i used this modem with other >>applications (based on AT commands too) and worked fine (the same machine, >>same port). >>I can`t even make it visible for kannel not to mention of setting m20 based >>smsc... >> >>I have a question to you, if someone of you is using M20 Terminal with >>kannel? Maybe someone have similar problem and solved it and want to share >>how to do it;-) >> >>I have tried to set smsc both AT and AT2 type - no success. I`ve tried >>autodetection, changing speed, even changing query-string. The green LED is >>still blinking and modem gives no answer to kannel. >> >> > >led is blinking means you are not yet registered on GSM network. >It shouldn't matter to the opening of at port, but either way.... > >I'm using two M20 without problems, with modemtype=sienems_m20 and >speed=19200 > > > We're also using M20 terminals w/o problems - we had some problems with sim buffering and an old M20 which was probably faulty, but the new bunch we got work perfectly.
-- Oded > >