Hi, try with sqlbox we are using kannel with 4gb and 1 core processor it's provide us upto 150-200 TPS
thanks On Wed, Jan 25, 2017 at 5:26 PM, Daniel <danielkwo...@hotmail.com> wrote: > Hi All, > > I have been having serious queuing on my SMSC binds. > > The telco operator indicates that they have not limited our TPS but I > can't seem to push more. > > Kannel status page always show less than 2TPS and msgs are queued all day > and night. > > My setup is on a 48GB 16CORE machine and am using nginx php-fpm to receive > dlrs. > > How can I optimize my config to increase throughput.. > > Please find my config below: > > > #KannelConfiguration > group=core > admin-port =xxxx > admin-password =xxxx > admin-allow-ip =*.*.*.* > smsbox-port =xxxx > log-file =/var/log/kannel.log > log-level =5 > access-log =/var/log/access/kannel-access.log > access-log-clean =true > access-log-format ="%t%l[SMSC:%i][SVC:%n][ACT:% > A][BINF:%B][FID:%F][from:%p][to:%P][flags:%m:%c:%M:%C:%d][ > msg:%L:%b][udh:%U:%u]" > sms-resend-freq=3600 > dlr-storage=spool > dlr-spool="/var/spool/kannel_dlr" > store-type=spool > store-location="/var/spool/kannel_spool" > > > ## SMSC - 40 of these > > group=smsc > smsc=smpp > smsc-id=TELCO > host= xx.xx.xx.xx > port=xxxx > transceiver-mode=true > smsc-username=username > smsc-password=password > source-addr-ton=0 > dest-addr-ton=1 > source-addr-npi=1 > dest-addr-npi=1 > system-type= > allowed-smsc-id=TELCO > max-pending-submits=400 > wait-ack=600 > wait-ack-expire=0x02 > log-file="/var/log/telc_logs/smsc.log" > > Will appreciate your help very much. Thanks > > Regards, > > >